Re: [PATCH 10/15] pinctrl: sh-pfc: sh7734: Fix shifted values in IPSR10

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Dec 13, 2018 at 07:27:09PM +0100, Geert Uytterhoeven wrote:
> Some values in the Peripheral Function Select Register 10 descriptor are
> shifted by one position, which may cause a peripheral function to be
> programmed incorrectly.
> 
> Fixing this makes all HSCIF0 pins use Function 4 (value 3), like was
> already the case for the HSCK0 pin in field IP10[5:3].
> 
> Fixes: ac1ebc2190f575fc ("sh-pfc: Add sh7734 pinmux support")
> Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> ---
> Based on the SH7734 Hardware User's Manual Rev. 1.00.
> Compile-tested only.
> 
> Noticed when investigating a different bug in the same register
> description.
> ---
>  drivers/pinctrl/sh-pfc/pfc-sh7734.c | 16 ++++++++--------
>  1 file changed, 8 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7734.c b/drivers/pinctrl/sh-pfc/pfc-sh7734.c
> index cad70f9cf5699f0c..748a32a3af82d368 100644
> --- a/drivers/pinctrl/sh-pfc/pfc-sh7734.c
> +++ b/drivers/pinctrl/sh-pfc/pfc-sh7734.c
> @@ -2210,22 +2210,22 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
>  	    /* IP10_22 [1] */
>  		FN_CAN_CLK_A, FN_RX4_D,
>  	    /* IP10_21_19 [3] */
> -		FN_AUDIO_CLKOUT, FN_TX1_E, FN_HRTS0_C, FN_FSE_B,
> -		FN_LCD_M_DISP_B, 0, 0, 0,
> +		FN_AUDIO_CLKOUT, FN_TX1_E, 0, FN_HRTS0_C, FN_FSE_B,

FN_FSE_B does no appear to be documented for this field in Users' Manual
Hardware v1.00 (Jun 12, 2012). Should it be 0?

Otherwise this patch looks good.


Reviewed-by: Simon Horman <horms+renesas@xxxxxxxxxxxx>


> +		FN_LCD_M_DISP_B, 0, 0,
>  	    /* IP10_18_16 [3] */
> -		FN_AUDIO_CLKC, FN_SCK1_E, FN_HCTS0_C, FN_FRB_B,
> -		FN_LCD_VEPWC_B, 0, 0, 0,
> +		FN_AUDIO_CLKC, FN_SCK1_E, 0, FN_HCTS0_C, FN_FRB_B,
> +		FN_LCD_VEPWC_B, 0, 0,
>  	    /* IP10_15 [1] */
>  		FN_AUDIO_CLKB_A, FN_LCD_CLK_B,
>  	    /* IP10_14_12 [3] */
>  		FN_AUDIO_CLKA_A, FN_VI1_CLK_B, FN_SCK1_D, FN_IECLK_B,
>  		FN_LCD_FLM_B, 0, 0, 0,
>  	    /* IP10_11_9 [3] */
> -		FN_SSI_SDATA3, FN_VI1_7_B, FN_HTX0_C, FN_FWE_B,
> -		FN_LCD_CL2_B, 0, 0, 0,
> +		FN_SSI_SDATA3, FN_VI1_7_B, 0, FN_HTX0_C, FN_FWE_B,
> +		FN_LCD_CL2_B, 0, 0,
>  	    /* IP10_8_6 [3] */
> -		FN_SSI_SDATA2, FN_VI1_6_B, FN_HRX0_C, FN_FRE_B,
> -		FN_LCD_CL1_B, 0, 0, 0,
> +		FN_SSI_SDATA2, FN_VI1_6_B, 0, FN_HRX0_C, FN_FRE_B,
> +		FN_LCD_CL1_B, 0, 0,
>  	    /* IP10_5_3 [3] */
>  		FN_SSI_WS23, FN_VI1_5_B, FN_TX1_D, FN_HSCK0_C, FN_FALE_B,
>  		FN_LCD_DON_B, 0, 0,
> -- 
> 2.17.1
> 



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux