Some values in the Peripheral Function Select Register 10 descriptor are
shifted by one position, which may cause a peripheral function to be
programmed incorrectly.
Fixing this makes all HSCIF0 pins use Function 4 (value 3), like was
already the case for the HSCK0 pin in field IP10[5:3].
Fixes: ac1ebc2190f575fc ("sh-pfc: Add sh7734 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
Based on the SH7734 Hardware User's Manual Rev. 1.00.
Compile-tested only.
Noticed when investigating a different bug in the same register
description.
---
drivers/pinctrl/sh-pfc/pfc-sh7734.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/pinctrl/sh-pfc/pfc-sh7734.c b/drivers/pinctrl/sh-pfc/pfc-sh7734.c
index cad70f9cf5699f0c..748a32a3af82d368 100644
--- a/drivers/pinctrl/sh-pfc/pfc-sh7734.c
+++ b/drivers/pinctrl/sh-pfc/pfc-sh7734.c
@@ -2210,22 +2210,22 @@ static const struct pinmux_cfg_reg pinmux_config_regs[] = {
/* IP10_22 [1] */
FN_CAN_CLK_A, FN_RX4_D,
/* IP10_21_19 [3] */
- FN_AUDIO_CLKOUT, FN_TX1_E, FN_HRTS0_C, FN_FSE_B,
- FN_LCD_M_DISP_B, 0, 0, 0,
+ FN_AUDIO_CLKOUT, FN_TX1_E, 0, FN_HRTS0_C, FN_FSE_B,
+ FN_LCD_M_DISP_B, 0, 0,
/* IP10_18_16 [3] */
- FN_AUDIO_CLKC, FN_SCK1_E, FN_HCTS0_C, FN_FRB_B,
- FN_LCD_VEPWC_B, 0, 0, 0,
+ FN_AUDIO_CLKC, FN_SCK1_E, 0, FN_HCTS0_C, FN_FRB_B,
+ FN_LCD_VEPWC_B, 0, 0,
/* IP10_15 [1] */
FN_AUDIO_CLKB_A, FN_LCD_CLK_B,
/* IP10_14_12 [3] */
FN_AUDIO_CLKA_A, FN_VI1_CLK_B, FN_SCK1_D, FN_IECLK_B,
FN_LCD_FLM_B, 0, 0, 0,
/* IP10_11_9 [3] */
- FN_SSI_SDATA3, FN_VI1_7_B, FN_HTX0_C, FN_FWE_B,
- FN_LCD_CL2_B, 0, 0, 0,
+ FN_SSI_SDATA3, FN_VI1_7_B, 0, FN_HTX0_C, FN_FWE_B,
+ FN_LCD_CL2_B, 0, 0,
/* IP10_8_6 [3] */
- FN_SSI_SDATA2, FN_VI1_6_B, FN_HRX0_C, FN_FRE_B,
- FN_LCD_CL1_B, 0, 0, 0,
+ FN_SSI_SDATA2, FN_VI1_6_B, 0, FN_HRX0_C, FN_FRE_B,
+ FN_LCD_CL1_B, 0, 0,
/* IP10_5_3 [3] */
FN_SSI_WS23, FN_VI1_5_B, FN_TX1_D, FN_HSCK0_C, FN_FALE_B,
FN_LCD_DON_B, 0, 0,
--
2.17.1
