[PATCH v3 0/2] Add Initial Device Tree for RZ/A2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add a Device Tree for RZ/A2 and the existing eval board.

Once these get approved, I'll start piling on the other drivers in
another patch series

NOTE:
Since Rob is currently converting shmobile.txt to renesas.yaml,
I'll wait till renesas.yaml hits -next, then add this RZ/A2M EVB
board (it's too confusing to me to figure out how to make a patch
series using multiple different trees)

Chris Brandt (2):
  ARM: dts: r7s9210: Initial SoC device tree
  ARM: dts: r7s9210-rza2mevb: Add support for RZ/A2M EVB

 arch/arm/boot/dts/Makefile             |   1 +
 arch/arm/boot/dts/r7s9210-rza2mevb.dts |  82 +++++++++++++
 arch/arm/boot/dts/r7s9210.dtsi         | 204 +++++++++++++++++++++++++++++++++
 3 files changed, 287 insertions(+)
 create mode 100644 arch/arm/boot/dts/r7s9210-rza2mevb.dts
 create mode 100644 arch/arm/boot/dts/r7s9210.dtsi

-- 
2.16.1




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux