Hi Niklas,
On Friday, 2 November 2018 12:38:34 EET Niklas Söderlund wrote:
> On 2018-10-05 01:36:11 +0300, Laurent Pinchart wrote:
> > On Thursday, 4 October 2018 23:41:35 EEST Niklas Söderlund wrote:
> > > From: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> > >
> > > Reorder the initialization order of registers to allow for refactoring.
> > > The move could have been done at the same time as the refactoring but
> > > since the documentation about some registers involved are missing do it
> > > separately.
> > >
> > > Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> > > ---
> > >
> > > drivers/media/i2c/adv748x/adv748x-core.c | 12 +++++++-----
> > > 1 file changed, 7 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/drivers/media/i2c/adv748x/adv748x-core.c
> > > b/drivers/media/i2c/adv748x/adv748x-core.c index
> > > 6854d898fdd1f192..721ed6552bc1cde6 100644
> > > --- a/drivers/media/i2c/adv748x/adv748x-core.c
> > > +++ b/drivers/media/i2c/adv748x/adv748x-core.c
> > > @@ -383,8 +383,6 @@ static const struct adv748x_reg_value
> > > adv748x_init_txa_4lane[] = { {ADV748X_PAGE_IO, 0x0c, 0xe0}, /* Enable
> > > LLC_DLL & Double LLC Timing */ {ADV748X_PAGE_IO, 0x0e, 0xdd}, /*
> > > LLC/PIX/SPI PINS TRISTATED AUD */
> > >
> > > - {ADV748X_PAGE_TXA, 0x00, 0x84}, /* Enable 4-lane MIPI */
> > > - {ADV748X_PAGE_TXA, 0x00, 0xa4}, /* Set Auto DPHY Timing */
> > >
> > > {ADV748X_PAGE_TXA, 0xdb, 0x10}, /* ADI Required Write */
> > > {ADV748X_PAGE_TXA, 0xd6, 0x07}, /* ADI Required Write */
> > > {ADV748X_PAGE_TXA, 0xc4, 0x0a}, /* ADI Required Write */
> > >
> > > @@ -392,6 +390,9 @@ static const struct adv748x_reg_value
> > > adv748x_init_txa_4lane[] = { {ADV748X_PAGE_TXA, 0x72, 0x11}, /* ADI
> > > Required Write */
> > >
> > > {ADV748X_PAGE_TXA, 0xf0, 0x00}, /* i2c_dphy_pwdn - 1'b0 */
> > >
> > > + {ADV748X_PAGE_TXA, 0x00, 0x84}, /* Enable 4-lane MIPI */
> > > + {ADV748X_PAGE_TXA, 0x00, 0xa4}, /* Set Auto DPHY Timing */
> > > +
> > >
> > > {ADV748X_PAGE_TXA, 0x31, 0x82}, /* ADI Required Write */
> > > {ADV748X_PAGE_TXA, 0x1e, 0x40}, /* ADI Required Write */
> > > {ADV748X_PAGE_TXA, 0xda, 0x01}, /* i2c_mipi_pll_en - 1'b1 */
> > >
> > > @@ -435,17 +436,18 @@ static const struct adv748x_reg_value
> > > adv748x_init_txb_1lane[] = { {ADV748X_PAGE_SDP, 0x31, 0x12}, /* ADI
> > > Required Write */
> > >
> > > {ADV748X_PAGE_SDP, 0xe6, 0x4f}, /* V bit end pos manually in NTSC
*/
> > >
> > > - {ADV748X_PAGE_TXB, 0x00, 0x81}, /* Enable 1-lane MIPI */
> > > - {ADV748X_PAGE_TXB, 0x00, 0xa1}, /* Set Auto DPHY Timing */
> > >
> > > {ADV748X_PAGE_TXB, 0xd2, 0x40}, /* ADI Required Write */
> > > {ADV748X_PAGE_TXB, 0xc4, 0x0a}, /* ADI Required Write */
> > > {ADV748X_PAGE_TXB, 0x71, 0x33}, /* ADI Required Write */
> > > {ADV748X_PAGE_TXB, 0x72, 0x11}, /* ADI Required Write */
> > > {ADV748X_PAGE_TXB, 0xf0, 0x00}, /* i2c_dphy_pwdn - 1'b0 */
> > >
> > > +
> > > + {ADV748X_PAGE_TXB, 0x00, 0x81}, /* Enable 1-lane MIPI */
> > > + {ADV748X_PAGE_TXB, 0x00, 0xa1}, /* Set Auto DPHY Timing */
> > > +
> >
> > This is pretty hard to review, as there's a bunch of undocumented register
> > writes. I think the first write is safe, as the tables are written
> > immediately following a software reset, and the default value of the
> > register is 0x81 (CSI-TX disabled, 1 lane). The second write, however,
> > enables usage of the computed DPHY parameters, and I don't know whether
> > the undocumented register writes in-between may interact with that.
>
> I agree it's hard to grasp all implications with undocumented registers
> involved. That is why I choose to do it in a separate commit so if
> regressions are found it could be bisectable to this change.
>
> > That being said, this change enables further important refactoring, so I'm
> > tempted to accept it. I assume you've tested it and haven't noticed a
> > regression. The part that still bothers me in particular is that the write
> > to register 0xf0 just above this takes the DPHY out of power down
> > according to the datasheet, and I wonder whether at that point the DPHY
> > might not react to that information. Have you analyzed the power-up
> > sequence in section 9.5.1 of the hardware manual ? I wonder whether the
> > dphy_pwdn shouldn't be handled in the power up and power down sequences,
> > which might involve also moving the above four (and five for TXA)
> > undocumented writes to the power up sequence as well.
>
> I looked at the documentation and ran lots of tests based on this change
> and noticed no change in behavior.
As a last test, could you try programming completely invalid values to the
undocumented registers before taking the DPHY out of power down ? I'm worried
that things might work just because the registers happen to contain acceptable
values when the DPHY is powered up, and that it might break later because the
sequence of operations resulting from starting and stopping the video streams
in different configurations would end up taking the DPHY out of power down
with invalid values in those registers.
> >> {ADV748X_PAGE_TXB, 0x31, 0x82}, /* ADI Required Write */
> >> {ADV748X_PAGE_TXB, 0x1e, 0x40}, /* ADI Required Write */
> >> {ADV748X_PAGE_TXB, 0xda, 0x01}, /* i2c_mipi_pll_en - 1'b1 */
> >> -
> >> {ADV748X_PAGE_WAIT, 0x00, 0x02},/* delay 2 */
> >> {ADV748X_PAGE_TXB, 0x00, 0x21 },/* Power-up CSI-TX */
> >> {ADV748X_PAGE_WAIT, 0x00, 0x01},/* delay 1 */
--
Regards,
Laurent Pinchart
