[PATCH v2 4/5] ARM: dts: iwg23s-sbc: specify EtherAVB PHY IRQ

[Biju Das <biju.das@xxxxxxxxxxxxxx>]

Specify  EtherAVB PHY IRQ  in the board specific device tree, now that we
have GPIO support.

Signed-off-by: Biju Das <biju.das@xxxxxxxxxxxxxx>
Reviewed-by: Fabrizio Castro <fabrizio.castro@xxxxxxxxxxxxxx>
Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
V1-->V2
    * No change
    * compile time dependency on gpio dtsi patch
---
 arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
index 56182ee..22da819 100644
--- a/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
+++ b/arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts
@@ -35,6 +35,8 @@
 
 	phy3: ethernet-phy@3 {
 		reg = <3>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
 		micrel,led-mode = <1>;
 	};
 };
-- 
2.7.4