[PATCH v2 0/5] Add GPIO and EAVB Pinctrl support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch series aims to add GPIO and EAVB Pinctrl support
for RZ/G1C SoC.

V1-->V2
    Add support for gpio-reserved-ranges 

Biju Das (5):
  gpio: rcar: Add GPIO hole support
  dt-bindings: gpio: rcar: Add gpio-reserved-ranges support
  ARM: dts: r8a77470: Add GPIO support
  ARM: dts: iwg23s-sbc: specify EtherAVB PHY IRQ
  ARM: dts: iwg23s-sbc: Add pinctl support for EtherAVB

 .../devicetree/bindings/gpio/renesas,gpio-rcar.txt |  3 +
 arch/arm/boot/dts/r8a77470-iwg23s-sbc.dts          | 10 +++
 arch/arm/boot/dts/r8a77470.dtsi                    | 91 ++++++++++++++++++++++
 drivers/gpio/gpio-rcar.c                           | 30 ++++++-
 4 files changed, 133 insertions(+), 1 deletion(-)

-- 
2.7.4




[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux