Re: [PATCH] vfio: platform: Fix using devices in PM Domains

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Eric,

On Fri, Apr 13, 2018 at 11:14 AM, Auger Eric <eric.auger@xxxxxxxxxx> wrote:
> On 11/04/18 11:24, Geert Uytterhoeven wrote:
>> If a device is part of a PM Domain (e.g. power and/or clock domain), its
>> power state is managed using Runtime PM.  Without Runtime PM, the device
>> may not be powered up, causing subtle failures, crashes, or system
>> lock-ups when the device is accessed by the guest.
> the device may not be powered up/clcoked or power/clock may be switched
> off while the guest uses it.
>>
>> Fix this by adding Runtime PM support, powering the device when the VFIO
>> device is opened by the guest.
>>
>> Note that while more fine-grained power management could be implemented
>> on the guest side, if exported, this would be inherently unsafe, as
>> abusing it may kill the whole system.
>
> Please can you elaborate on this remark please?

If power-management of the device would be delegated to the guest, and the
guest forgets to enable device power before accessing the device's registers,
this could lock up the system, and thus disturb both the host and other guests.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux