Re: [PATCH v5 00/10] Renesas RZ/A1 pin and gpio controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jacopo,

On Fri, Apr 28, 2017 at 9:24 AM, jmondi <jacopo@xxxxxxxxxx> wrote:
> On Thu, Apr 27, 2017 at 10:42:02AM +0200, Geert Uytterhoeven wrote:
>> On Thu, Apr 27, 2017 at 10:19 AM, Jacopo Mondi
>> <jacopo+renesas@xxxxxxxxxx> wrote:
>> >    this is 5th round of gpio/pincontroller for RZ/A1 devices.
>> >
>> > I have updated the pin controller driver to use the newly introduced
>> > "pinctrl_enable()" function.
>> > This is required since v4.11-rc7 as otherwise, as reported by Chris Brandt,
>> > the pin controller does not start.
>> >
>> > I have incorporated your comments on the device tree bindings documentation,
>> > and added to pinctrl-generic.h header file two macros to unpack generic
>> > properties and their arguments.
>> >
>> > Tested with SCIF, RIIC, ETHER and gpio-leds on Genmai board.
>>
>> Thanks for the update!
>>
>> > Jacopo Mondi (10):
>> >   pinctrl: generic: Add bi-directional and output-enable
>>
>> Already applied by LinusW.
>>
>> >   pinctrl: generic: Add macros to unpack properties
>>
>> LinusW: do you want me to queue this together with the driver for v4.13,
>> or will you take this single patch for v4.12?
>>
>> >   pinctrl: Renesas RZ/A1 pin and gpio controller
>> >   dt-bindings: pinctrl: Add RZ/A1 bindings doc
>>
>> Will queue in sh-pfc-for-v4.13.
>>
>> >   arm: dts: dt-bindings: Add Renesas RZ/A1 pinctrl header
>> >   arm: dts: r7s72100: Add pin controller node
>> >   arm: dts: genmai: Add SCIF2 pin group
>> >   arm: dts: genmai: Add RIIC2 pin group
>> >   arm: dts: genmai: Add user led device nodes
>> >   arm: dts: genmai: Add ethernet pin group
>>
>> These are for Simon.
>>
>> Does applying the DTS changes before the driver introduce regressions?
>> If no, Simon can queue them for v4.13.
>> If yes, they'll have to wait for v4.14.
>>
>
> I tried reverting patch [03/10] which introduces the driver, and I
> lose serial output on Genmai. So I guess the dts patches have to be
> taken after the driver has been merged.
>
> One question: why can't they be taken at the same time? (eg. for
> v4.13?)

Because the driver goes in through me and LinusW, while the DTS goes in
through Simon and arm-soc.

If Simon applies the DTS patches, it will regress genmai in renesas-devel
until the release of v4.13-rc1.

An immutable branch would solve that, but for adding PFC we usuable just
postpone the DT part by one cycle.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux