On Thu, Apr 27, 2017 at 04:37:35PM +0200, Ulrich Hecht wrote: > Hi! > > Here's the revised series enabling PWMs on r8a7795 and r8a7796 Salvator-X > boards. > > This revision addresses the issues found by Geert and adds Laurent's > backlight support patch, including a version for r8a7796. > > CU > Uli > > Changes since v1: > - PWM clock is S0D12, not S3D4 > - dts: fix register lengths, add resets > - only enable one set of pins for each PWM > - add backlight support > > > Laurent Pinchart (1): > arm64: dts: r8a7795: salvator-x: Add panel backlight support > > Ryo Kodama (2): > clk: renesas: r8a7796: add PWM clock > arm64: dts: r8a7796-salvator-x: Add PWM device support > > Takeshi Kihara (3): > pinctrl: sh-pfc: r8a7796: Add PWM pins, groups and functions > arm64: dts: r8a7796: Add PWM device nodes > arm64: dts: r8a7795-salvator-x: Enable PWM2 > > Ulrich Hecht (2): > arm64: dts: r8a7796: salvator-x: Add panel backlight support > dt-bindings: pwm: Add R-Car M3-W device tree bindings Hi, am I correct in thinking that the dts patches do not cause a regression and their only DT dependency is on the "renesas,pwm-r8a7796" compat string. If so I am of a mind to quire them up as the nodes that need the new compat string also make use of the "renesas,pwm-rcar" compat string which is already present in mainline.
