Re: [PATCH 08/19] sh: sh3: sh770x: Fix platform data for the IRDA serial port

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Laurent,

On Wed, Jan 4, 2017 at 12:06 AM, Laurent Pinchart
<laurent.pinchart+renesas@xxxxxxxxxxxxxxxx> wrote:
> Even though most of its registers are 8-bit wide, the IRDA has two
> 16-bit registers that make it a 16-bit peripheral and not a 8-bit
> peripheral with addresses shifted by one. Fix the memory resource size
> and the platform data regshift value.
>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> ---
>  arch/sh/kernel/cpu/sh3/setup-sh770x.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
>
> diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
> index e1e54258b822..084a91e6027e 100644
> --- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c
> +++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
> @@ -157,11 +157,10 @@ static struct platform_device scif1_device = {
>  static struct plat_sci_port scif2_platform_data = {
>         .type           = PORT_IRDA,
>         .ops            = &sh770x_sci_port_ops,
> -       .regshift       = 1,

According to my sh7707 and sh7709 datasheets. regshift = 1 is correct.

SCIx_IRDA_REGTYPE uses:

                [SCSMR]         = { 0x00,  8 },
                [SCBRR]         = { 0x01,  8 },
                [SCSCR]         = { 0x02,  8 },
                [SCxTDR]        = { 0x03,  8 },
                [SCxSR]         = { 0x04,  8 },
                [SCxRDR]        = { 0x05,  8 },
                [SCFCR]         = { 0x06,  8 },
                [SCFDR]         = { 0x07, 16 },

While the datasheet says:

        SCSMR1  H'A4000140      8 bits
        SCBRR1  H'A4000142      8 bits
        SCSCR1  H'A4000144      8 bits
        SCFTDR1 H'A4000146      8 bits
        SCSSR1  H'A4000148      16 bits
        SCFRDR1 H'A400014A      8 bits
        SCFCR1  H'A400014C      8 bits
        SCFDR1  H'A400014E      16 bits

So you do need regshift = 1 to handle the gaps.

Note that SCSSR1 is a 16-bit registers, while SCIx_IRDA_REGTYPE
declares it as 8-bit, so it may not work at all...

Ah, you're fixing all this in "[PATCH 19/19] serial: sh-sci: Compute the
regshift value for SCI ports".
I think that part should be moved to this patch, to not break bisection.

>  static struct resource scif2_resources[] = {
> -       DEFINE_RES_MEM(0xa4000140, 0x10),
> +       DEFINE_RES_MEM(0xa4000140, 0x20),
>         DEFINE_RES_IRQ(evt2irq(0x880)),
>  };

According to the register list above, resource size 0x10 is correct.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds



[Index of Archives]     [Linux Samsung SOC]     [Linux Wireless]     [Linux Kernel]     [ATH6KL]     [Linux Bluetooth]     [Linux Netdev]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Samba]     [Device Mapper]

  Powered by Linux