Even though most of its registers are 8-bit wide, the IRDA has two
16-bit registers that make it a 16-bit peripheral and not a 8-bit
peripheral with addresses shifted by one. Fix the registers offset in
the driver and the platform data regshift value.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
arch/sh/kernel/cpu/sh3/setup-sh770x.c | 1 -
drivers/tty/serial/sh-sci.c | 17 ++++++++---------
2 files changed, 8 insertions(+), 10 deletions(-)
diff --git a/arch/sh/kernel/cpu/sh3/setup-sh770x.c b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
index e1e54258b822..592cd9ab30c4 100644
--- a/arch/sh/kernel/cpu/sh3/setup-sh770x.c
+++ b/arch/sh/kernel/cpu/sh3/setup-sh770x.c
@@ -157,7 +157,6 @@ static struct platform_device scif1_device = {
static struct plat_sci_port scif2_platform_data = {
.type = PORT_IRDA,
.ops = &sh770x_sci_port_ops,
- .regshift = 1,
};
static struct resource scif2_resources[] = {
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 8c58c43fc85d..1eb91ba43b2e 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -193,18 +193,17 @@ static const struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = {
},
/*
- * Common definitions for legacy IrDA ports, dependent on
- * regshift value.
+ * Common definitions for legacy IrDA ports.
*/
[SCIx_IRDA_REGTYPE] = {
[SCSMR] = { 0x00, 8 },
- [SCBRR] = { 0x01, 8 },
- [SCSCR] = { 0x02, 8 },
- [SCxTDR] = { 0x03, 8 },
- [SCxSR] = { 0x04, 8 },
- [SCxRDR] = { 0x05, 8 },
- [SCFCR] = { 0x06, 8 },
- [SCFDR] = { 0x07, 16 },
+ [SCBRR] = { 0x02, 8 },
+ [SCSCR] = { 0x04, 8 },
+ [SCxTDR] = { 0x06, 8 },
+ [SCxSR] = { 0x08, 8 },
+ [SCxRDR] = { 0x0a, 8 },
+ [SCFCR] = { 0x0c, 8 },
+ [SCFDR] = { 0x0e, 16 },
[SCTFDR] = sci_reg_invalid,
[SCRFDR] = sci_reg_invalid,
[SCSPTR] = sci_reg_invalid,
--
Regards,
Laurent Pinchart
