Re: [PATCH] ACPI / hotplug / PCI: Allocate resources directly under the non-hotplug bridge

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Nov 07, 2019 at 08:40:55AM -0600, Bjorn Helgaas wrote:
> On Thu, Nov 07, 2019 at 04:02:59PM +0200, Mika Westerberg wrote:
> > On Thu, Nov 07, 2019 at 07:52:46AM -0600, Bjorn Helgaas wrote:
> > > > > What would happen if a device below one of the non-hotplug
> > > > > bridges, e.g., 3a:00.0, had an I/O BAR?  Would this patch
> > > > > still work?
> > > > 
> > > > I think it would still work because now we call
> > > > pci_bus_size_bridges() only for non-hotplug bridge which do not
> > > > have I/O window open so pbus_size_io() fails to find the "free"
> > > > I/O resource on that bus and the kernel then fails to assign
> > > > that I/O resource for the device.
> > > 
> > > Not sure I understand; are you saying that we wouldn't have the
> > > EC/GPE issue, but we'd be unable to use a device below 3a:00.0
> > > that happened to have an I/O BAR?
> > 
> > Yes.
> > 
> > > That doesn't sound optimal because there is I/O space available
> > > that could be routed to 3a:00.0
> > 
> > If the none of the upstream bridges up to the PCIe root port does
> > not have I/O window open, I don't think we can do much about it.
> > Unless I'm missing something of course.
> 
> The path to this hypothetical 3a:00.0 device is:
> 
>   PCI host bridge to bus 0000:00
>   pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
>   pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
>   00:1b.0: Root Port to [bus 02-3a]
>   02:00.0: Switch Upstream Port to [bus 03-3a]
>   03:02.0: Switch Downstream Port to [bus 3a]
>   3a:00.0: reg 0x10: [io  0x????-0x????]
> 
> None of the bridges (00:1b.0, 02:00.0, 03:02.0) currently has an open
> I/O window, but there's space available on bus 00 and windows *could*
> be opened.

Right.

> I guess it comes down to that ordering problem: this Notify() and
> acpiphp_native_scan_bridge() happens before pnp/system.c reserves
> things, so we don't yet know what space is actually available.

Yes, exactly. The some parts of the range 0x0d00-0xffff belongs to
PNP/ACPI so if we open the window now it might stomp over some crucial
ACPI resources.

> If firmware had configured I/O windows for these bridges, 3a:00.0
> would probably work.  But it doesn't seem right that we would depend
> on that firmware configuration.

Well, if firmware has configured the topology in such way I think we
should at least try to trust it is intentional. Even if the (PCIe)
device might have an I/O BAR it should work without it (only legacy
endpoints are allowed to create I/O requests, althought many non-legacy
seem to include I/O BAR).



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux