Re: [PATCH v2] PCI: Block power management of certain ports with slot implemented bit set

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Peter,

On Tue, Jan 08, 2019 at 11:35:07AM +0200, Mika Westerberg wrote:
> On Mon, Jan 07, 2019 at 02:13:14PM +0100, Rafael J. Wysocki wrote:
> > On Mon, Jan 7, 2019 at 2:01 PM Mika Westerberg
> > <mika.westerberg@xxxxxxxxxxxxxxx> wrote:
> > >
> > > Gigabyte X299 DESIGNARE EX motherboard has one PCIe root port that is
> > > connected to Alpine Ridge Thunderbolt controller. This port has slot
> > > implemented bit set in the config space but other than that it is not
> > > hotplug capable in the sense we are expecting in Linux (it has
> > > dev->is_hotplug_bridge set to 0):
> > >
> > > 00:1c.4 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5
> > >         Bus: primary=00, secondary=05, subordinate=46, sec-latency=0
> > >         Memory behind bridge: 78000000-8fffffff [size=384M]
> > >         Prefetchable memory behind bridge: 00003800f8000000-00003800ffffffff [size=128M]
> > >         ...
> > >         Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
> > >         ...
> > >                 SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
> > >                         Slot #8, PowerLimit 25.000W; Interlock- NoCompl+
> > >                 SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> > >                         Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
> > >                 SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
> > >                         Changed: MRL- PresDet+ LinkState+
> > >
> > > This system is using ACPI based hotplug to notify the OS that it needs
> > > to rescan the PCI bus (ACPI hotplug).
> > >
> > > If there is nothing connected to any of the Thunderbolt ports the root
> > > port will not have any runtime PM active children and is thus
> > > automatically runtime suspended pretty soon after boot by PCI PM core.
> > > Now, when a device is connected the BIOS SMI handler responsible for
> > > enumerating newly added devices is not able to find anything because the
> > > port is in D3.
> > >
> > > For this reason we block power management of PCIe root and downstream
> > > ports that have slot implemented set and have node in ACPI namespace.
> > >
> > > Link: https://bugzilla.kernel.org/show_bug.cgi?id=202031
> > > Reported-by: Kedar A Dongre <kedar.a.dongre@xxxxxxxxx>
> > > Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
> > 
> > Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>
> 
> Thanks!
> 
> However, I'm having second toughts about this because I remembered that
> people put a lot of effort getting discrete graphics with power resource
> attached to the root port powering off properly. If the root port
> matches the criteria in this patch it will not be able to go into D3
> anymore. It might affect others such as M.2 connected NVMe or WiFi chip
> as well. For that reason I would still prefer blacklist, at least for now.

Would this patch:

    https://patchwork.ozlabs.org/patch/1021317/

break runtime D3cold for the discrete GPU on Optimus laptops such as
your Clevo P651RA?  Specifically, is the Root Port above the GPU
marked "(Slot+)" in lspci -vv?  (There doesn't seem to be raw lspci
output in https://github.com/Lekensteyn/acpi-stuff)

Thanks,

Lukas



[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux