On Tue, Apr 10, 2018 at 01:58:33PM +0100, Gustavo Pimentel wrote: > Replaces "ctrlreg" reg-name by "dbi" to be coherent with similar drivers, > however it still be compatible with any previous DT that uses the old > reg-name. > > Replaces the PCIe base address example by a real PCIe base address in use. > > Signed-off-by: Gustavo Pimentel <gustavo.pimentel@xxxxxxxxxxxx> > --- > Changes v1->v2: > - Removed any iATU reference or changes to avoid confusion. > - Add "snps,dw-pcie" compatible string following Kishon's suggestion. > Changes v2->v3: > - Nothing changed, just to follow the patch set version. > > Documentation/devicetree/bindings/pci/designware-pcie.txt | 14 +++++++------- > 1 file changed, 7 insertions(+), 7 deletions(-) > > diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt > index 1da7ade..f02cd20 100644 > --- a/Documentation/devicetree/bindings/pci/designware-pcie.txt > +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt > @@ -1,7 +1,8 @@ > * Synopsys DesignWare PCIe interface > > Required properties: > -- compatible: should contain "snps,dw-pcie" to identify the core. > +- compatible: > + "snps,dw-pcie-rc", "snps,dw-pcie" for RC mode; I think adding this compatible is pointless. "snps,dw-pcie" meant RC and should continue to mean that. We also have compatibles with the IP version number as well as the SoC specific compatible strings. We don't need 4 compatible strings here. Rob
