This series calls the dma ops configuration for the devices
at a generic place so that it works for all busses.
The dma_configure_ops for a device is now called during
the device_attach callback just before the probe of the
bus/driver is called. Similarly dma_deconfigure is called during
device/driver_detach path.
pci_bus_add_devices (platform/amba)(_device_create/driver_register)
| |
pci_bus_add_device (device_add/driver_register)
| |
device_attach device_initial_probe
| |
__device_attach_driver __device_attach_driver
|
driver_probe_device
|
really_probe
|
dma_configure
Similarly on the device/driver_unregister path __device_release_driver is
called which inturn calls dma_deconfigure.
Rebased the series against mainline 4.11-rc1. Applies and builds cleanly
against mainline and linux-next. There is a conflict with patch#9
against iommu-next, but that should go away eventually as iommu-next
is rebased against 4.11-rc1.
* Tested with platform and pci devices for probe deferral
and reprobe on arm64 based platform.
Previous post of this series [6].
[V9]
* Rebased on top of 4.11-rc1.
* Merged Robin's fixes for legacy binding issue,
pci devices with no iommu-map property.
[V8]
* Picked up all the acks and tested tags from Marek and
Hanjun for DT and ACPI patches respectively, since
no functional changes was done.
* Addressed Minor comments Sinan and Bjorn.
* Added Robin's fix for fixing the deferencing NULL for
of_iommu_table after init in patch #2.
* Rebased it on top of linux-next
[V7]
* Updated the subject and commit log for patch #6 as per
comments from Lorenzo. No functional changes.
[V6]
* Fixed a bug in dma_configure function pointed out by
Robin.
* Reordered the patches as per comments from Robin and
Lorenzo.
* Added Tags.
[V5]
* Reworked the pci configuration code hanging outside and
pushed it to dma_configure as in PATCH#5,6,7.
Also added a couple of patches that Lorenzo provided for
correcting the Probe deferring mechanism in case of
ACPI devices from here [5].
[V4]
* Took the reworked patches [2] from Robin's branch and
rebased on top of Lorenzo's ACPI IORT ARM support series [3].
* Added the patches for moving the dma ops configuration of
acpi based devices to probe time as well.
[V3]
* Removed the patch to split dma_masks/dma_ops configuration
separately based on review comments that both masks and ops are
required only during the device probe time.
* Reworked the series based on Generic DT bindings series.
* Added call to iommu's remove_device in the cleanup path for arm and
arm64.
* Removed the notifier trick in arm64 to handle early device
registration.
* Added reset of dma_ops in cleanup path for arm based on comments.
* Fixed the pci_iommu_configure path and tested with PCI device as
well.
* Fixed a bug to return the correct iommu_ops from patch 7 [4] in
last post.
* Fixed few other cosmetic comments.
[V2]
* Updated the Initial post to call dma_configure/deconfigure from
generic code
* Added iommu add_device callback from of_iommu_configure path
[V1]
* Initial post from Laurent Pinchart [1]
[1] http://lists.linuxfoundation.org/pipermail/iommu/2015-May/013016.html
[2] http://www.linux-arm.org/git?p=linux-rm.git;a=shortlog;h=refs/heads/iommu/defer
[3] https://lkml.org/lkml/2016/11/21/141
[4] https://www.mail-archive.com/iommu@xxxxxxxxxxxxxxxxxxxxxxxxxx/msg13940.html
[5] git://git.kernel.org/pub/scm/linux/kernel/git/lpieralisi/linux.git iommu/probe-deferral
[6] http://www.spinics.net/lists/linux-pci/msg57992.html
[7] https://www.spinics.net/lists/arm-kernel/msg556209.html
Laurent Pinchart (3):
of: dma: Move range size workaround to of_dma_get_range()
of: dma: Make of_dma_deconfigure() public
iommu: of: Handle IOMMU lookup failure with deferred probing or error
Lorenzo Pieralisi (2):
ACPI/IORT: Add function to check SMMUs drivers presence
ACPI/IORT: Remove linker section for IORT entries probing
Robin Murphy (3):
iommu/of: Refactor of_iommu_configure() for error handling
iommu/of: Prepare for deferred IOMMU configuration
iommu/arm-smmu: Clean up early-probing workarounds
Sricharan R (3):
of/acpi: Configure dma operations at probe time for platform/amba/pci
bus devices
drivers: acpi: Handle IOMMU lookup failure with deferred probing or
error
arm64: dma-mapping: Remove the notifier trick to handle early setting
of dma_ops
arch/arm64/mm/dma-mapping.c | 142 +++++---------------------------------
drivers/acpi/arm64/iort.c | 40 ++++++++++-
drivers/acpi/glue.c | 5 --
drivers/acpi/scan.c | 7 +-
drivers/base/dd.c | 9 +++
drivers/base/dma-mapping.c | 41 +++++++++++
drivers/iommu/arm-smmu-v3.c | 46 +-----------
drivers/iommu/arm-smmu.c | 110 +++++++++++++----------------
drivers/iommu/of_iommu.c | 126 ++++++++++++++++++++++++---------
drivers/of/address.c | 20 +++++-
drivers/of/device.c | 34 ++++-----
drivers/of/platform.c | 10 +--
drivers/pci/probe.c | 28 --------
include/acpi/acpi_bus.h | 2 +-
include/asm-generic/vmlinux.lds.h | 1 -
include/linux/acpi.h | 7 +-
include/linux/acpi_iort.h | 3 -
include/linux/dma-mapping.h | 3 +
include/linux/of_device.h | 10 ++-
19 files changed, 308 insertions(+), 336 deletions(-)
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
