[PATCH V9 03/11] of: dma: Move range size workaround to of_dma_get_range()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>

Invalid dma-ranges values should be worked around when retrieving the
DMA range in of_dma_get_range(), not by all callers of the function.
This isn't much of a problem now that we have a single caller, but that
situation will change when moving DMA configuration to device probe
time.

Tested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
 drivers/of/address.c | 20 ++++++++++++++++++--
 drivers/of/device.c  | 15 ---------------
 2 files changed, 18 insertions(+), 17 deletions(-)

diff --git a/drivers/of/address.c b/drivers/of/address.c
index 02b2903..6aeb816 100644
--- a/drivers/of/address.c
+++ b/drivers/of/address.c
@@ -819,8 +819,8 @@ void __iomem *of_io_request_and_map(struct device_node *np, int index,
  *	CPU addr (phys_addr_t)	: pna cells
  *	size			: nsize cells
  *
- * It returns -ENODEV if "dma-ranges" property was not found
- * for this device in DT.
+ * Return 0 on success, -ENODEV if the "dma-ranges" property was not found for
+ * this device in DT, or -EINVAL if the CPU address or size is invalid.
  */
 int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *size)
 {
@@ -880,6 +880,22 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz
 	*dma_addr = dmaaddr;
 
 	*size = of_read_number(ranges + naddr + pna, nsize);
+	/*
+	 * DT nodes sometimes incorrectly set the size as a mask. Work around
+	 * those incorrect DT by computing the size as mask + 1.
+	 */
+	if (*size & 1) {
+		pr_warn("%s: size 0x%llx for dma-range in node(%s) set as mask\n",
+			__func__, *size, np->full_name);
+		*size = *size + 1;
+	}
+
+	if (!*size) {
+		pr_err("%s: invalid size zero for dma-range in node(%s)\n",
+		       __func__, np->full_name);
+		ret = -EINVAL;
+		goto out;
+	}
 
 	pr_debug("dma_addr(%llx) cpu_addr(%llx) size(%llx)\n",
 		 *dma_addr, *paddr, *size);
diff --git a/drivers/of/device.c b/drivers/of/device.c
index b1e6beb..09dedd0 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -110,21 +110,6 @@ void of_dma_configure(struct device *dev, struct device_node *np)
 		size = dev->coherent_dma_mask + 1;
 	} else {
 		offset = PFN_DOWN(paddr - dma_addr);
-
-		/*
-		 * Add a work around to treat the size as mask + 1 in case
-		 * it is defined in DT as a mask.
-		 */
-		if (size & 1) {
-			dev_warn(dev, "Invalid size 0x%llx for dma-range\n",
-				 size);
-			size = size + 1;
-		}
-
-		if (!size) {
-			dev_err(dev, "Adjusted size 0x%llx invalid\n", size);
-			return;
-		}
 		dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", offset);
 	}
 
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux