Hi Arnd,
On Fri, Dec 06, 2013 at 10:46:23PM +0800, Arnd Bergmann wrote:
> On Friday 06 December 2013, Pratyush Anand wrote:
>
> > >
[...]
> > > > For example in SPEAr1340, physically RAM is mapped on above addresses.
> > > > PCIe address translation unit can accept address only in the range of
> > > > core addresses which are assigned to PCIe RC ie 0x80000000-0x8FFFFFFF.
> > >
> > > Since this is a physical address, it corresponds to address space 3 in
> > > my list above, and the address you pick here is what you pass to
> > > pci_ioremap_io.
> >
> > This is what I was expecting. But currently designware driver does not
> > pass this address to pci_ioremap_io.
> > OK.. We will fix it and will send patch.
>
> I think it does handle this correctly, look at
>
> static int dw_pcie_setup(int nr, struct pci_sys_data *sys)
> {
> ...
> if (global_io_offset < SZ_1M && pp->config.io_size > 0) {
> sys->io_offset = global_io_offset - pp->config.io_bus_addr;
> pci_ioremap_io(sys->io_offset, pp->io.start);
> global_io_offset += SZ_64K;
> pci_add_resource_offset(&sys->resources, &pp->io,
> sys->io_offset);
> }
> ...
> }
>
> I believe this does the right thing, but you have to put the correct
> translation into the 'ranges' property of the host bridge node in DT.
May be not exactly. pp->io is the realio, and it is passed correctly
to pci_add_resource_offset. But, as you had also
said that pci_ioremap_io will receive cpu physical address space as
input, therefore I think following modification will be needed to work
io transaction properly.
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index be6ce30..cf68632 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -378,6 +378,7 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
+ global_io_offset);
pp->config.io_size = resource_size(&pp->io);
pp->config.io_bus_addr = range.pci_addr;
+ pp->io_base = range.cpu_addr;
}
if (restype == IORESOURCE_MEM) {
of_pci_range_to_resource(&range, np, &pp->mem);
@@ -403,7 +404,6 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
pp->cfg0_base = pp->cfg.start;
pp->cfg1_base = pp->cfg.start + pp->config.cfg0_size;
- pp->io_base = pp->io.start;
pp->mem_base = pp->mem.start;
pp->va_cfg0_base = devm_ioremap(pp->dev, pp->cfg0_base,
@@ -667,7 +667,7 @@ static int dw_pcie_setup(int nr, struct pci_sys_data *sys)
if (global_io_offset < SZ_1M && pp->config.io_size > 0) {
sys->io_offset = global_io_offset - pp->config.io_bus_addr;
- pci_ioremap_io(sys->io_offset, pp->io.start);
+ pci_ioremap_io(sys->io_offset, pp->io_base);
global_io_offset += SZ_64K;
pci_add_resource_offset(&sys->resources, &pp->io,
sys->io_offset);
Regards
Pratyush
>
> Arnd
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
