Re: [PATCH v2 1/5] dt-bindings: PCI: Add STM32MP25 PCIe root complex bindings

[Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>]

On Tue, Nov 26, 2024 at 04:51:15PM +0100, Christian Bruel wrote:
> Document the bindings for STM32MP25 PCIe Controller configured in
> root complex mode.
> 
> Supports 4 legacy interrupts and MSI interrupts from the ARM
> GICv2m controller.
> 
> STM32 PCIe may be in a power domain which is the case for the STM32MP25
> based boards.
> 
> Supports wake# from wake-gpios
> 
> Signed-off-by: Christian Bruel <christian.bruel@xxxxxxxxxxx>
> ---
>  .../bindings/pci/st,stm32-pcie-common.yaml    | 45 +++++++++
>  .../bindings/pci/st,stm32-pcie-host.yaml      | 99 +++++++++++++++++++
>  2 files changed, 144 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml
>  create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml b/Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml
> new file mode 100644
> index 000000000000..479c03134da3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml
> @@ -0,0 +1,45 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/st,stm32-pcie-common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STM32MP25 PCIe RC/EP controller
> +
> +maintainers:
> +  - Christian Bruel <christian.bruel@xxxxxxxxxxx>
> +
> +description:
> +  STM32MP25 PCIe RC/EP common properties
> +
> +properties:
> +  clocks:
> +    maxItems: 1
> +    description: PCIe system clock
> +
> +  resets:
> +    maxItems: 1
> +
> +  phys:
> +    maxItems: 1
> +
> +  phy-names:
> +    const: pcie-phy
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  access-controllers:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    description: GPIO controlled connection to PERST# signal
> +    maxItems: 1
> +
> +required:
> +  - clocks
> +  - resets
> +  - phys
> +  - phy-names
> +
> +additionalProperties: true
> diff --git a/Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml b/Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml
> new file mode 100644
> index 000000000000..18083cc69024
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml
> @@ -0,0 +1,99 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/st,stm32-pcie-host.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STM32MP25 PCIe root complex driver
> +
> +maintainers:
> +  - Christian Bruel <christian.bruel@xxxxxxxxxxx>
> +
> +description:
> +  PCIe root complex controller based on the Synopsys DesignWare PCIe core.
> +
> +allOf:
> +  - $ref: /schemas/pci/snps,dw-pcie.yaml#
> +  - $ref: /schemas/pci/st,stm32-pcie-common.yaml#
> +
> +select:
> +  properties:
> +    compatible:
> +      const: st,stm32mp25-pcie-rc
> +  required:
> +    - compatible
> +
> +properties:
> +  compatible:
> +    const: st,stm32mp25-pcie-rc
> +
> +  reg:
> +    items:
> +      - description: Data Bus Interface (DBI) registers.
> +      - description: PCIe configuration registers.
> +
> +  reg-names:
> +    items:
> +      - const: dbi
> +      - const: config
> +
> +  num-lanes:
> +    const: 1
> +
> +  msi-parent:
> +    maxItems: 1
> +
> +  wake-gpios:
> +    description: GPIO controlled connection to WAKE# input signal
> +    maxItems: 1
> +
> +  wakeup-source: true
> +
> +dependentRequired:
> +  wakeup-source: [ wake-gpios ]
> +
> +required:
> +  - interrupt-map
> +  - interrupt-map-mask
> +  - ranges
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/st,stm32mp25-rcc.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/phy/phy.h>
> +    #include <dt-bindings/reset/st,stm32mp25-rcc.h>
> +
> +    pcie@48400000 {
> +        compatible = "st,stm32mp25-pcie-rc";
> +        device_type = "pci";
> +        num-lanes = <1>;
> +        reg = <0x48400000 0x400000>,
> +              <0x10000000 0x10000>;
> +        reg-names = "dbi", "config";
> +        #interrupt-cells = <1>;
> +        interrupt-map-mask = <0 0 0 7>;
> +        interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
> +                        <0 0 0 2 &intc 0 0 GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
> +                        <0 0 0 3 &intc 0 0 GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
> +                        <0 0 0 4 &intc 0 0 GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
> +        #address-cells = <3>;
> +        #size-cells = <2>;
> +        ranges = <0x01000000 0 0x10010000 0x10010000 0 0x10000>,

PCI address of I/O region should start from address 0x00000000.

Also use hex notation for all values.

- Mani

-- 
மணிவண்ணன் சதாசிவம்