On 12/3/24 14:34, Manivannan Sadhasivam wrote:
On Tue, Nov 26, 2024 at 04:51:15PM +0100, Christian Bruel wrote:
Document the bindings for STM32MP25 PCIe Controller configured in
root complex mode.
Supports 4 legacy interrupts and MSI interrupts from the ARM
GICv2m controller.
STM32 PCIe may be in a power domain which is the case for the STM32MP25
based boards.
Supports wake# from wake-gpios
Signed-off-by: Christian Bruel <christian.bruel@xxxxxxxxxxx>
---
.../bindings/pci/st,stm32-pcie-common.yaml | 45 +++++++++
.../bindings/pci/st,stm32-pcie-host.yaml | 99 +++++++++++++++++++
2 files changed, 144 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml
create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml
diff --git a/Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml b/Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml
new file mode 100644
index 000000000000..479c03134da3
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml
@@ -0,0 +1,45 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/st,stm32-pcie-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32MP25 PCIe RC/EP controller
+
+maintainers:
+ - Christian Bruel <christian.bruel@xxxxxxxxxxx>
+
+description:
+ STM32MP25 PCIe RC/EP common properties
+
+properties:
+ clocks:
+ maxItems: 1
+ description: PCIe system clock
+
+ resets:
+ maxItems: 1
+
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: pcie-phy
+
+ power-domains:
+ maxItems: 1
+
+ access-controllers:
+ maxItems: 1
+
+ reset-gpios:
+ description: GPIO controlled connection to PERST# signal
+ maxItems: 1
+
+required:
+ - clocks
+ - resets
+ - phys
+ - phy-names
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml b/Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml
new file mode 100644
index 000000000000..18083cc69024
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml
@@ -0,0 +1,99 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/st,stm32-pcie-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32MP25 PCIe root complex driver
+
+maintainers:
+ - Christian Bruel <christian.bruel@xxxxxxxxxxx>
+
+description:
+ PCIe root complex controller based on the Synopsys DesignWare PCIe core.
+
+allOf:
+ - $ref: /schemas/pci/snps,dw-pcie.yaml#
+ - $ref: /schemas/pci/st,stm32-pcie-common.yaml#
+
+select:
+ properties:
+ compatible:
+ const: st,stm32mp25-pcie-rc
+ required:
+ - compatible
+
+properties:
+ compatible:
+ const: st,stm32mp25-pcie-rc
+
+ reg:
+ items:
+ - description: Data Bus Interface (DBI) registers.
+ - description: PCIe configuration registers.
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: config
+
+ num-lanes:
+ const: 1
+
+ msi-parent:
+ maxItems: 1
+
+ wake-gpios:
+ description: GPIO controlled connection to WAKE# input signal
+ maxItems: 1
+
+ wakeup-source: true
+
+dependentRequired:
+ wakeup-source: [ wake-gpios ]
+
+required:
+ - interrupt-map
+ - interrupt-map-mask
+ - ranges
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/st,stm32mp25-rcc.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/phy/phy.h>
+ #include <dt-bindings/reset/st,stm32mp25-rcc.h>
+
+ pcie@48400000 {
+ compatible = "st,stm32mp25-pcie-rc";
+ device_type = "pci";
+ num-lanes = <1>;
+ reg = <0x48400000 0x400000>,
+ <0x10000000 0x10000>;
+ reg-names = "dbi", "config";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 2 &intc 0 0 GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 3 &intc 0 0 GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 0 4 &intc 0 0 GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x01000000 0 0x10010000 0x10010000 0 0x10000>,
PCI address of I/O region should start from address 0x00000000.
ok, thanks !
Also use hex notation for all values.
- Mani
