On Tue, Nov 26, 2024 at 04:51:15PM +0100, Christian Bruel wrote: > Document the bindings for STM32MP25 PCIe Controller configured in > root complex mode. > > Supports 4 legacy interrupts and MSI interrupts from the ARM > GICv2m controller. > > STM32 PCIe may be in a power domain which is the case for the STM32MP25 > based boards. > > Supports wake# from wake-gpios > > Signed-off-by: Christian Bruel <christian.bruel@xxxxxxxxxxx> > --- > .../bindings/pci/st,stm32-pcie-common.yaml | 45 +++++++++ > .../bindings/pci/st,stm32-pcie-host.yaml | 99 +++++++++++++++++++ > 2 files changed, 144 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml > create mode 100644 Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml > > diff --git a/Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml b/Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml > new file mode 100644 > index 000000000000..479c03134da3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/st,stm32-pcie-common.yaml > @@ -0,0 +1,45 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/st,stm32-pcie-common.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: STM32MP25 PCIe RC/EP controller > + > +maintainers: > + - Christian Bruel <christian.bruel@xxxxxxxxxxx> > + > +description: > + STM32MP25 PCIe RC/EP common properties > + > +properties: > + clocks: > + maxItems: 1 > + description: PCIe system clock > + > + resets: > + maxItems: 1 > + > + phys: > + maxItems: 1 > + > + phy-names: > + const: pcie-phy > + > + power-domains: > + maxItems: 1 > + > + access-controllers: > + maxItems: 1 > + > + reset-gpios: > + description: GPIO controlled connection to PERST# signal > + maxItems: 1 > + > +required: > + - clocks > + - resets > + - phys > + - phy-names > + > +additionalProperties: true > diff --git a/Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml b/Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml > new file mode 100644 > index 000000000000..18083cc69024 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/st,stm32-pcie-host.yaml > @@ -0,0 +1,99 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/st,stm32-pcie-host.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: STM32MP25 PCIe root complex driver > + > +maintainers: > + - Christian Bruel <christian.bruel@xxxxxxxxxxx> > + > +description: > + PCIe root complex controller based on the Synopsys DesignWare PCIe core. > + > +allOf: > + - $ref: /schemas/pci/snps,dw-pcie.yaml# > + - $ref: /schemas/pci/st,stm32-pcie-common.yaml# > + > +select: You don't need select. > + properties: > + compatible: > + const: st,stm32mp25-pcie-rc > + required: > + - compatible > + > +properties: > + compatible: > + const: st,stm32mp25-pcie-rc > + > + reg: > + items: > + - description: Data Bus Interface (DBI) registers. > + - description: PCIe configuration registers. > + > + reg-names: > + items: > + - const: dbi > + - const: config > + > + num-lanes: > + const: 1 Not required, so what's the default? If it can only ever be 1, then why do you need the property? > + > + msi-parent: > + maxItems: 1 > + > + wake-gpios: > + description: GPIO controlled connection to WAKE# input signal > + maxItems: 1 > + > + wakeup-source: true > + > +dependentRequired: > + wakeup-source: [ wake-gpios ] > + > +required: > + - interrupt-map > + - interrupt-map-mask > + - ranges > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/clock/st,stm32mp25-rcc.h> > + #include <dt-bindings/gpio/gpio.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/phy/phy.h> > + #include <dt-bindings/reset/st,stm32mp25-rcc.h> > + > + pcie@48400000 { > + compatible = "st,stm32mp25-pcie-rc"; > + device_type = "pci"; > + num-lanes = <1>; > + reg = <0x48400000 0x400000>, > + <0x10000000 0x10000>; > + reg-names = "dbi", "config"; > + #interrupt-cells = <1>; > + interrupt-map-mask = <0 0 0 7>; > + interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>, > + <0 0 0 2 &intc 0 0 GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>, > + <0 0 0 3 &intc 0 0 GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>, > + <0 0 0 4 &intc 0 0 GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>; > + #address-cells = <3>; > + #size-cells = <2>; > + ranges = <0x01000000 0 0x10010000 0x10010000 0 0x10000>, > + <0x02000000 0 0x10020000 0x10020000 0 0x7fe0000>, > + <0x42000000 0 0x18000000 0x18000000 0 0x8000000>; > + clocks = <&rcc CK_BUS_PCIE>; > + phys = <&combophy PHY_TYPE_PCIE>; > + phy-names = "pcie-phy"; > + resets = <&rcc PCIE_R>; > + msi-parent = <&v2m0>; > + wakeup-source; > + wake-gpios = <&gpioh 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; > + reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>; > + access-controllers = <&rifsc 68>; > + power-domains = <&CLUSTER_PD>; > + }; > + > -- > 2.34.1 >
