[PATCH v2 0/2] PCI/AER: Report fatal errors of RCiEP and EP if link recoverd

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



changes since v1:
- rewrite commit log per Bjorn
- refactor aer_get_device_error_info to reduce duplication per Keith
- fix to avoid reporting fatal errors twice for root and downstream ports per Keith

The AER driver has historically avoided reading the configuration space of an
endpoint or RCiEP that reported a fatal error, considering the link to that
device unreliable. Consequently, when a fatal error occurs, the AER and DPC
drivers do not report specific error types, resulting in logs like:

  pcieport 0000:30:03.0: EDR: EDR event received
  pcieport 0000:30:03.0: DPC: containment event, status:0x0005 source:0x3400
  pcieport 0000:30:03.0: DPC: ERR_FATAL detected
  pcieport 0000:30:03.0: AER: broadcast error_detected message
  nvme nvme0: frozen state error detected, reset controller
  nvme 0000:34:00.0: ready 0ms after DPC
  pcieport 0000:30:03.0: AER: broadcast slot_reset message

AER status registers are sticky and Write-1-to-clear. If the link recovered
after hot reset, we can still safely access AER status of the error device.
In such case, report fatal errors which helps to figure out the error root
case.

- Patch 1/2 identifies the error device by SOURCE ID register
- Patch 2/3 reports the AER status if link recoverd.

After this patch set, the logs like:

  pcieport 0000:30:03.0: EDR: EDR event received
  pcieport 0000:30:03.0: DPC: containment event, status:0x0005 source:0x3400
  pcieport 0000:30:03.0: DPC: ERR_FATAL detected
  pcieport 0000:30:03.0: AER: broadcast error_detected message
  nvme nvme0: frozen state error detected, reset controller
  pcieport 0000:30:03.0: waiting 100 ms for downstream link, after activation
  nvme 0000:34:00.0: ready 0ms after DPC
  nvme 0000:34:00.0: PCIe Bus Error: severity=Uncorrectable (Fatal), type=Data Link Layer, (Receiver ID)
  nvme 0000:34:00.0:   device [144d:a804] error status/mask=00000010/00504000
  nvme 0000:34:00.0:    [ 4] DLP                    (First)
  pcieport 0000:30:03.0: AER: broadcast slot_reset message

Shuai Xue (2):
  PCI/DPC: Run recovery on device that detected the error
  PCI/AER: Report fatal errors of RCiEP and EP if link recoverd

 drivers/pci/pci.h      |  5 +++--
 drivers/pci/pcie/aer.c | 11 +++++++----
 drivers/pci/pcie/dpc.c | 32 +++++++++++++++++++++++++-------
 drivers/pci/pcie/edr.c | 35 ++++++++++++++++++-----------------
 drivers/pci/pcie/err.c |  9 +++++++++
 5 files changed, 62 insertions(+), 30 deletions(-)

-- 
2.39.3





[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux