On Thu, Jul 25, 2024 at 12:31 AM Manivannan Sadhasivam
<manivannan.sadhasivam@xxxxxxxxxx> wrote:
>
> On Tue, Jul 16, 2024 at 05:31:18PM -0400, Jim Quinlan wrote:
> > o Move the clk_prepare_enable() below the resource allocations.
> > o Add a jump target (clk_out) so that a bit of exception handling can be
> > better reused at the end of this function implementation.
> >
> > Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
> > Reviewed-by: Stanimir Varbanov <svarbanov@xxxxxxx>
> > Reviewed-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
> > ---
> > drivers/pci/controller/pcie-brcmstb.c | 29 +++++++++++++++------------
> > 1 file changed, 16 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> > index c08683febdd4..c257434edc08 100644
> > --- a/drivers/pci/controller/pcie-brcmstb.c
> > +++ b/drivers/pci/controller/pcie-brcmstb.c
> > @@ -1613,31 +1613,30 @@ static int brcm_pcie_probe(struct platform_device *pdev)
> >
> > pcie->ssc = of_property_read_bool(np, "brcm,enable-ssc");
> >
> > - ret = clk_prepare_enable(pcie->clk);
> > - if (ret) {
> > - dev_err(&pdev->dev, "could not enable clock\n");
> > - return ret;
> > - }
> > pcie->rescal = devm_reset_control_get_optional_shared(&pdev->dev, "rescal");
> > - if (IS_ERR(pcie->rescal)) {
> > - clk_disable_unprepare(pcie->clk);
> > + if (IS_ERR(pcie->rescal))
> > return PTR_ERR(pcie->rescal);
> > - }
> > +
> > pcie->perst_reset = devm_reset_control_get_optional_exclusive(&pdev->dev, "perst");
> > - if (IS_ERR(pcie->perst_reset)) {
> > - clk_disable_unprepare(pcie->clk);
> > + if (IS_ERR(pcie->perst_reset))
> > return PTR_ERR(pcie->perst_reset);
> > +
> > + ret = clk_prepare_enable(pcie->clk);
> > + if (ret) {
> > + dev_err(&pdev->dev, "could not enable clock\n");
> > + return ret;
> > }
> >
> > ret = reset_control_reset(pcie->rescal);
> > - if (ret)
> > + if (ret) {
> > dev_err(&pdev->dev, "failed to deassert 'rescal'\n");
> > + goto clk_out;
>
> Please use a descriptive name for the err labels. Here this err path disables
> and unprepares the clk, so use 'clk_disable_unprepare'.
ack
>
> > + }
> >
> > ret = brcm_phy_start(pcie);
> > if (ret) {
> > reset_control_rearm(pcie->rescal);
> > - clk_disable_unprepare(pcie->clk);
> > - return ret;
> > + goto clk_out;
> > }
> >
> > ret = brcm_pcie_setup(pcie);
> > @@ -1676,6 +1675,10 @@ static int brcm_pcie_probe(struct platform_device *pdev)
> >
> > return 0;
> >
> > +clk_out:
> > + clk_disable_unprepare(pcie->clk);
> > + return ret;
> > +
>
> This is leaking the resources. Move this new label below 'fail'.
What resources is it leaking? At "clk_out" the return value will be negative
and only managed resources have been allocated at that juncture.
Regards,
Jim Quinlan
Broadcom STB/CM
>
> - Mani
>
> --
> மணிவண்ணன் சதாசிவம்
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
