On Tue, Jul 16, 2024 at 05:31:18PM -0400, Jim Quinlan wrote:
> o Move the clk_prepare_enable() below the resource allocations.
> o Add a jump target (clk_out) so that a bit of exception handling can be
> better reused at the end of this function implementation.
>
> Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
> Reviewed-by: Stanimir Varbanov <svarbanov@xxxxxxx>
> Reviewed-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
> ---
> drivers/pci/controller/pcie-brcmstb.c | 29 +++++++++++++++------------
> 1 file changed, 16 insertions(+), 13 deletions(-)
>
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index c08683febdd4..c257434edc08 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -1613,31 +1613,30 @@ static int brcm_pcie_probe(struct platform_device *pdev)
>
> pcie->ssc = of_property_read_bool(np, "brcm,enable-ssc");
>
> - ret = clk_prepare_enable(pcie->clk);
> - if (ret) {
> - dev_err(&pdev->dev, "could not enable clock\n");
> - return ret;
> - }
> pcie->rescal = devm_reset_control_get_optional_shared(&pdev->dev, "rescal");
> - if (IS_ERR(pcie->rescal)) {
> - clk_disable_unprepare(pcie->clk);
> + if (IS_ERR(pcie->rescal))
> return PTR_ERR(pcie->rescal);
> - }
> +
> pcie->perst_reset = devm_reset_control_get_optional_exclusive(&pdev->dev, "perst");
> - if (IS_ERR(pcie->perst_reset)) {
> - clk_disable_unprepare(pcie->clk);
> + if (IS_ERR(pcie->perst_reset))
> return PTR_ERR(pcie->perst_reset);
> +
> + ret = clk_prepare_enable(pcie->clk);
> + if (ret) {
> + dev_err(&pdev->dev, "could not enable clock\n");
> + return ret;
> }
>
> ret = reset_control_reset(pcie->rescal);
> - if (ret)
> + if (ret) {
> dev_err(&pdev->dev, "failed to deassert 'rescal'\n");
> + goto clk_out;
Please use a descriptive name for the err labels. Here this err path disables
and unprepares the clk, so use 'clk_disable_unprepare'.
> + }
>
> ret = brcm_phy_start(pcie);
> if (ret) {
> reset_control_rearm(pcie->rescal);
> - clk_disable_unprepare(pcie->clk);
> - return ret;
> + goto clk_out;
> }
>
> ret = brcm_pcie_setup(pcie);
> @@ -1676,6 +1675,10 @@ static int brcm_pcie_probe(struct platform_device *pdev)
>
> return 0;
>
> +clk_out:
> + clk_disable_unprepare(pcie->clk);
> + return ret;
> +
This is leaking the resources. Move this new label below 'fail'.
- Mani
--
மணிவண்ணன் சதாசிவம்
