[PATCH v4 00/12] PCI: brcnstb: Enable STB 7712 SOC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



V4 Changes:
  o Commit "Check return value of all reset_control_xxx calls"
    -- Blank line before "return" (Stan)
  o Commit "Use common error handling code in brcmstb_probe()"
    -- Drop the "Fixes" tag (Stan)
  o Commit "dt-bindings: PCI ..."
    -- Separate the main commit into two: cleanup and adding the
       7712 SoC (Krzysztof)
    -- Fold maintainer change commit into cleanup change (Krzysztof)
    -- Use minItems/maxItems where appropriate (Krzysztof)
    -- Consistent order of resets/reset-names in decl and usage
       (Krzysztof)

V3 Changes:
  o Commit "Enable 7712 SOCs"
    -- Move "model" check from outside to inside func (Stan)
  o Commit "Check return value of all reset_control_xxx calls"
    -- Propagate errors up the chain instead of ignoring them (Stan)
  o Commit "Refactor for chips with many regular inbound BARs"
    -- Nine suggestions given, nine implemented (Stan)
  o Commit "Make HARD_DEBUG, INTR2_CPU_BASE offsets SoC-specific"
    -- Drop tab, add parens around macro params in expression (Stan)
  o Commit "Use swinit reset if available"
    -- Treat swinit the same as other reset controllers (Stan)
       Stan suggested to use dev_err_probe() for getting resources
       but I will defer that to future series (if that's okay).
  o Commit "Get resource before we start asserting resets"
    -- Squash this with previous commit (Stan)
  o Commit "Use "clk_out" error path label"
    -- Move clk_prepare_enable() after getting resouurces (Stan)
    -- Change subject to "Use more common error handling code in
       brcm_pcie_probe()" (Markus)
    -- Use imperative commit description (Markus)
    -- "Fixes:" tag added for missing error return. (Markus)
  o Commit "dt-bindings: PCI ..."
    -- Split off maintainer change in separate commit.
    -- Tried to accomodate Krzysztof's requests, I'm not sure I
       have succeeded.  Krzysztof, please see [1] below.
  
  [1] Wrt the YAML of brcmstb PCIe resets, here is what I am trying
      to describe:

      CHIP       NUM_RESETS    NAMES
      ====       ==========    =====
      4908       1             perst
      7216       1             rescal
      7712       3             rescal, bridge, swinit
      Others     0             -


V2 Changes (note: four new commits):
  o Commit "dt-bindings: PCI ..."
    -- s/Adds/Add/, fix spelling error (Bjorn)
    -- Order compatible strings alphabetically (Krzysztof)
    -- Give definitions first then rules (Krzysztof)
    -- Add reason for change in maintainer (Krzysztof)
  o Commit "Use swinit reset if available"
    -- no need for "else" clause (Philipp)
    -- fix improper use of dev_err_probe() (Philipp) 
  o Commit "Use "clk_out" error path label"
    -- Improve commit message (Bjorn)
  o Commit "PCI: brcmstb: Make HARD_DEBUG, INTR2_CPU_BASE offsets SoC-specific"
    -- Improve commit subject line (Bjorn)
  o Commit (NEW) -- Change field name from 'type' to 'model'
    -- Added as requested (Stanimir)
  o Commit (NEW) -- Check return value of all reset_control_xxx calls
    -- Added as requested (Stanimir)
  o Commit (NEW) "Get resource before we start asserting reset controllers"
    -- Added as requested (Stanimir)
  o Commit (NEW) -- "Remove two unused constants from driver"


V1:
  This submission is for the Broadcom STB 7712, sibling SOC of the RPi5 chip.
  Stanimir has already submitted a patch "Add PCIe support for bcm2712" for
  the RPi version of the SOC.  It is hoped that Stanimir will allow us to
  submit this series first and subsequently rebase his patch(es).

  The largest commit, "Refactor for chips with many regular inbound BARs"
  affects both the STB and RPi SOCs.  It allows for multiple inbound ranges
  where previously only one was effectively used.  This feature will also
  be present in future STB chips, as well as Broadcom's Cable Modem group.

Jim Quinlan (12):
  dt-bindings: PCI: Cleanup of brcmstb YAML and add 7712 SoC
  dt-bindings: PCI: brcmstb: Add 7712 SoC description
  PCI: brcmstb: Use common error handling code in brcm_pcie_probe()
  PCI: brcmstb: Use bridge reset if available
  PCI: brcmstb: Use swinit reset if available
  PCI: brcmstb: PCI: brcmstb: Make HARD_DEBUG, INTR2_CPU_BASE offsets
    SoC-specific
  PCI: brcmstb: Remove two unused constants from driver
  PCI: brcmstb: Don't conflate the reset rescal with phy ctrl
  PCI: brcmstb: Refactor for chips with many regular inbound BARs
  PCI: brcmstb: Check return value of all reset_control_xxx calls
  PCI: brcmstb: Change field name from 'type' to 'model'
  PCI: brcmstb: Enable 7712 SOCs

 .../bindings/pci/brcm,stb-pcie.yaml           |  50 +-
 drivers/pci/controller/pcie-brcmstb.c         | 485 +++++++++++++-----
 2 files changed, 400 insertions(+), 135 deletions(-)


base-commit: 55027e689933ba2e64f3d245fb1ff185b3e7fc81
-- 
2.17.1

Attachment: smime.p7s
Description: S/MIME Cryptographic Signature


[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux