The 'type' field used in the driver to discern SoC differences is confusing
so change it to the more apt 'model'. We considered using 'family' but
this conflicts with Broadcom's conception of a family; for example, 7216a0
and 7216b0 chips are both considered separate families as each has multiple
derivative product chips based on the original design.
Signed-off-by: Jim Quinlan <james.quinlan@xxxxxxxxxxxx>
Reviewed-by: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
---
drivers/pci/controller/pcie-brcmstb.c | 42 +++++++++++++--------------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 2fe1f2a26697..fa5616a56383 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -211,7 +211,7 @@ enum {
PCIE_INTR2_CPU_BASE,
};
-enum pcie_type {
+enum pcie_model {
GENERIC,
BCM7425,
BCM7435,
@@ -229,7 +229,7 @@ struct rc_bar {
struct pcie_cfg_data {
const int *offsets;
- const enum pcie_type type;
+ const enum pcie_model model;
const bool has_phy;
unsigned int num_inbound;
int (*perst_set)(struct brcm_pcie *pcie, u32 val);
@@ -270,7 +270,7 @@ struct brcm_pcie {
u64 msi_target_addr;
struct brcm_msi *msi;
const int *reg_offsets;
- enum pcie_type type;
+ enum pcie_model model;
struct reset_control *rescal;
struct reset_control *perst_reset;
struct reset_control *bridge;
@@ -288,7 +288,7 @@ struct brcm_pcie {
static inline bool is_bmips(const struct brcm_pcie *pcie)
{
- return pcie->type == BCM7435 || pcie->type == BCM7425;
+ return pcie->model == BCM7435 || pcie->model == BCM7425;
}
/*
@@ -852,7 +852,7 @@ static int brcm_pcie_get_inbound_wins(struct brcm_pcie *pcie,
* security considerations, and is not implemented in our modern
* SoCs.
*/
- if (pcie->type != BCM7712)
+ if (pcie->model != BCM7712)
set_bar(b++, &n, 0, 0, 0);
resource_list_for_each_entry(entry, &bridge->dma_ranges) {
@@ -869,7 +869,7 @@ static int brcm_pcie_get_inbound_wins(struct brcm_pcie *pcie,
* That being said, each BARs size must still be a power of
* two.
*/
- if (pcie->type == BCM7712)
+ if (pcie->model == BCM7712)
set_bar(b++, &n, size, cpu_beg, pcie_beg);
if (n > pcie->num_inbound)
@@ -886,7 +886,7 @@ static int brcm_pcie_get_inbound_wins(struct brcm_pcie *pcie,
* that enables multiple memory controllers. As such, it can return
* now w/o doing special configuration.
*/
- if (pcie->type == BCM7712)
+ if (pcie->model == BCM7712)
return n;
ret = of_property_read_variable_u64_array(pcie->np, "brcm,scb-sizes", pcie->memc_size, 1,
@@ -1008,7 +1008,7 @@ static void set_inbound_win_registers(struct brcm_pcie *pcie, const struct rc_ba
* 7712:
* All of their BARs need to be set.
*/
- if (pcie->type == BCM7712) {
+ if (pcie->model == BCM7712) {
/* BUS remap register settings */
reg_offset = brcm_ubus_reg_offset(i);
tmp = lower_32_bits(cpu_addr) & ~0xfff;
@@ -1036,7 +1036,7 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
return ret;
/* Ensure that PERST# is asserted; some bootloaders may deassert it. */
- if (pcie->type == BCM2711) {
+ if (pcie->model == BCM2711) {
ret = pcie->perst_set(pcie, 1);
if (ret) {
pcie->bridge_sw_init_set(pcie, 0);
@@ -1067,9 +1067,9 @@ static int brcm_pcie_setup(struct brcm_pcie *pcie)
*/
if (is_bmips(pcie))
burst = 0x1; /* 256 bytes */
- else if (pcie->type == BCM2711)
+ else if (pcie->model == BCM2711)
burst = 0x0; /* 128 bytes */
- else if (pcie->type == BCM7278)
+ else if (pcie->model == BCM7278)
burst = 0x3; /* 512 bytes */
else
burst = 0x2; /* 512 bytes */
@@ -1666,7 +1666,7 @@ static const int pcie_offsets_bmips_7425[] = {
static const struct pcie_cfg_data generic_cfg = {
.offsets = pcie_offsets,
- .type = GENERIC,
+ .model = GENERIC,
.perst_set = brcm_pcie_perst_set_generic,
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
.num_inbound = 3,
@@ -1674,7 +1674,7 @@ static const struct pcie_cfg_data generic_cfg = {
static const struct pcie_cfg_data bcm7425_cfg = {
.offsets = pcie_offsets_bmips_7425,
- .type = BCM7425,
+ .model = BCM7425,
.perst_set = brcm_pcie_perst_set_generic,
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
.num_inbound = 3,
@@ -1682,7 +1682,7 @@ static const struct pcie_cfg_data bcm7425_cfg = {
static const struct pcie_cfg_data bcm7435_cfg = {
.offsets = pcie_offsets,
- .type = BCM7435,
+ .model = BCM7435,
.perst_set = brcm_pcie_perst_set_generic,
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
.num_inbound = 3,
@@ -1690,7 +1690,7 @@ static const struct pcie_cfg_data bcm7435_cfg = {
static const struct pcie_cfg_data bcm4908_cfg = {
.offsets = pcie_offsets,
- .type = BCM4908,
+ .model = BCM4908,
.perst_set = brcm_pcie_perst_set_4908,
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
.num_inbound = 3,
@@ -1706,7 +1706,7 @@ static const int pcie_offset_bcm7278[] = {
static const struct pcie_cfg_data bcm7278_cfg = {
.offsets = pcie_offset_bcm7278,
- .type = BCM7278,
+ .model = BCM7278,
.perst_set = brcm_pcie_perst_set_7278,
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_7278,
.num_inbound = 3,
@@ -1714,7 +1714,7 @@ static const struct pcie_cfg_data bcm7278_cfg = {
static const struct pcie_cfg_data bcm2711_cfg = {
.offsets = pcie_offsets,
- .type = BCM2711,
+ .model = BCM2711,
.perst_set = brcm_pcie_perst_set_generic,
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_generic,
.num_inbound = 3,
@@ -1722,7 +1722,7 @@ static const struct pcie_cfg_data bcm2711_cfg = {
static const struct pcie_cfg_data bcm7216_cfg = {
.offsets = pcie_offset_bcm7278,
- .type = BCM7278,
+ .model = BCM7278,
.perst_set = brcm_pcie_perst_set_7278,
.bridge_sw_init_set = brcm_pcie_bridge_sw_init_set_7278,
.has_phy = true,
@@ -1779,7 +1779,7 @@ static int brcm_pcie_probe(struct platform_device *pdev)
pcie->dev = &pdev->dev;
pcie->np = np;
pcie->reg_offsets = data->offsets;
- pcie->type = data->type;
+ pcie->model = data->model;
pcie->perst_set = data->perst_set;
pcie->bridge_sw_init_set = data->bridge_sw_init_set;
pcie->has_phy = data->has_phy;
@@ -1848,7 +1848,7 @@ static int brcm_pcie_probe(struct platform_device *pdev)
goto fail;
pcie->hw_rev = readl(pcie->base + PCIE_MISC_REVISION);
- if (pcie->type == BCM4908 && pcie->hw_rev >= BRCM_PCIE_HW_REV_3_20) {
+ if (pcie->model == BCM4908 && pcie->hw_rev >= BRCM_PCIE_HW_REV_3_20) {
dev_err(pcie->dev, "hardware revision with unsupported PERST# setup\n");
ret = -ENODEV;
goto fail;
@@ -1863,7 +1863,7 @@ static int brcm_pcie_probe(struct platform_device *pdev)
}
}
- bridge->ops = pcie->type == BCM7425 ? &brcm7425_pcie_ops : &brcm_pcie_ops;
+ bridge->ops = pcie->model == BCM7425 ? &brcm7425_pcie_ops : &brcm_pcie_ops;
bridge->sysdata = pcie;
platform_set_drvdata(pdev, pcie);
--
2.17.1
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
