Add support for setting of two-bit field that allows selection of 4x
lane PCIe which was previously limited to only 2x lanes.
Signed-off-by: Matt Ranostay <mranostay@xxxxxx>
---
drivers/pci/controller/cadence/pci-j721e.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index a82f845cc4b5..d9b1527421c3 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -43,7 +43,6 @@ enum link_status {
};
#define J721E_MODE_RC BIT(7)
-#define LANE_COUNT_MASK BIT(8)
#define LANE_COUNT(n) ((n) << 8)
#define GENERATION_SEL_MASK GENMASK(1, 0)
@@ -207,11 +206,15 @@ static int j721e_pcie_set_lane_count(struct j721e_pcie *pcie,
{
struct device *dev = pcie->cdns_pcie->dev;
u32 lanes = pcie->num_lanes;
+ u32 mask = GENMASK(8, 8);
u32 val = 0;
int ret;
+ if (lanes == 4)
+ mask = GENMASK(9, 8);
+
val = LANE_COUNT(lanes - 1);
- ret = regmap_update_bits(syscon, offset, LANE_COUNT_MASK, val);
+ ret = regmap_update_bits(syscon, offset, mask, val);
if (ret)
dev_err(dev, "failed to set link count\n");
--
2.38.GIT
