Call phy_set_mode_ext() to notify the PHY driver that the PHY is being used in the EP mode. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- drivers/pci/controller/dwc/pcie-qcom-ep.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/pci/controller/dwc/pcie-qcom-ep.c b/drivers/pci/controller/dwc/pcie-qcom-ep.c index ec99116ad05c..11f887a2f7c4 100644 --- a/drivers/pci/controller/dwc/pcie-qcom-ep.c +++ b/drivers/pci/controller/dwc/pcie-qcom-ep.c @@ -240,6 +240,10 @@ static int qcom_pcie_enable_resources(struct qcom_pcie_ep *pcie_ep) if (ret) goto err_disable_clk; + ret = phy_set_mode_ext(pcie->phy, PHY_MODE_PCIE, 1); + if (ret) + goto err_phy_exit; + ret = phy_power_on(pcie_ep->phy); if (ret) goto err_phy_exit; -- 2.35.1