[RFC PATCH 2/4] phy: qcom-qmp-pcie: suppor separate tables for EP mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The PCIe QMP PHY requires different programming sequences when being
used for the RC (Root Complex) or for the EP (End Point) modes. Allow
selecting the submode and thus selecting a set of PHY programming
tables.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 33 ++++++++++++++++--------
 1 file changed, 22 insertions(+), 11 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 23ca5848c4a8..898288c1cd7d 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -1368,7 +1368,8 @@ struct qmp_phy_cfg {
 
 	/* Init sequence for PHY blocks - serdes, tx, rx, pcs */
 	struct qmp_phy_cfg_tables pri;
-	struct qmp_phy_cfg_tables sec;
+	struct qmp_phy_cfg_tables sec_rc; /* for the RC only */
+	struct qmp_phy_cfg_tables sec_ep; /* for the EP only */
 
 	/* clock ids to be requested */
 	const char * const *clk_list;
@@ -1418,6 +1419,7 @@ struct qmp_phy_cfg {
  * @index: lane index
  * @qmp: QMP phy to which this lane belongs
  * @mode: current PHY mode
+ * @sec: currently selected PHY init table set
  */
 struct qmp_phy {
 	struct phy *phy;
@@ -1433,6 +1435,7 @@ struct qmp_phy {
 	unsigned int index;
 	struct qcom_qmp *qmp;
 	enum phy_mode mode;
+	const struct qmp_phy_cfg_tables *sec;
 };
 
 /**
@@ -1683,7 +1686,7 @@ static const struct qmp_phy_cfg sm8250_qmp_gen3x1_pciephy_cfg = {
 	.pcs_misc_tbl		= sm8250_qmp_pcie_pcs_misc_tbl,
 	.pcs_misc_tbl_num	= ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
 	},
-	.sec = {
+	.sec_rc = {
 	.serdes_tbl		= sm8250_qmp_gen3x1_pcie_serdes_tbl,
 	.serdes_tbl_num		= ARRAY_SIZE(sm8250_qmp_gen3x1_pcie_serdes_tbl),
 	.rx_tbl			= sm8250_qmp_gen3x1_pcie_rx_tbl,
@@ -1726,7 +1729,7 @@ static const struct qmp_phy_cfg sm8250_qmp_gen3x2_pciephy_cfg = {
 	.pcs_misc_tbl		= sm8250_qmp_pcie_pcs_misc_tbl,
 	.pcs_misc_tbl_num	= ARRAY_SIZE(sm8250_qmp_pcie_pcs_misc_tbl),
 	},
-	.sec = {
+	.sec_rc = {
 	.tx_tbl			= sm8250_qmp_gen3x2_pcie_tx_tbl,
 	.tx_tbl_num		= ARRAY_SIZE(sm8250_qmp_gen3x2_pcie_tx_tbl),
 	.rx_tbl			= sm8250_qmp_gen3x2_pcie_rx_tbl,
@@ -1951,7 +1954,7 @@ static int qcom_qmp_phy_pcie_serdes_init(struct qmp_phy *qphy)
 	void __iomem *serdes = qphy->serdes;
 
 	qcom_qmp_phy_pcie_configure(serdes, cfg->regs, cfg->pri.serdes_tbl, cfg->pri.serdes_tbl_num);
-	qcom_qmp_phy_pcie_configure(serdes, cfg->regs, cfg->sec.serdes_tbl, cfg->sec.serdes_tbl_num);
+	qcom_qmp_phy_pcie_configure(serdes, cfg->regs, qphy->sec->serdes_tbl, qphy->sec->serdes_tbl_num);
 
 	return 0;
 }
@@ -2045,6 +2048,9 @@ static int qcom_qmp_phy_pcie_power_on(struct phy *phy)
 	unsigned int mask, val, ready;
 	int ret;
 
+	if (!qphy->sec)
+		qphy->sec = &cfg->sec_rc;
+
 	qcom_qmp_phy_pcie_serdes_init(qphy);
 
 	ret = clk_prepare_enable(qphy->pipe_clk);
@@ -2057,35 +2063,35 @@ static int qcom_qmp_phy_pcie_power_on(struct phy *phy)
 	qcom_qmp_phy_pcie_configure_lane(tx, cfg->regs,
 					 cfg->pri.tx_tbl, cfg->pri.tx_tbl_num, 1);
 	qcom_qmp_phy_pcie_configure_lane(tx, cfg->regs,
-					 cfg->sec.tx_tbl, cfg->sec.tx_tbl_num, 1);
+					 qphy->sec->tx_tbl, qphy->sec->tx_tbl_num, 1);
 
 	/* Configuration for other LANE for USB-DP combo PHY */
 	if (cfg->is_dual_lane_phy) {
 		qcom_qmp_phy_pcie_configure_lane(qphy->tx2, cfg->regs,
 						 cfg->pri.tx_tbl, cfg->pri.tx_tbl_num, 2);
 		qcom_qmp_phy_pcie_configure_lane(qphy->tx2, cfg->regs,
-						 cfg->sec.tx_tbl, cfg->sec.tx_tbl_num, 2);
+						 qphy->sec->tx_tbl, qphy->sec->tx_tbl_num, 2);
 	}
 
 	qcom_qmp_phy_pcie_configure_lane(rx, cfg->regs,
 					 cfg->pri.rx_tbl, cfg->pri.rx_tbl_num, 1);
 	qcom_qmp_phy_pcie_configure_lane(rx, cfg->regs,
-					 cfg->sec.rx_tbl, cfg->sec.rx_tbl_num, 1);
+					 qphy->sec->rx_tbl, qphy->sec->rx_tbl_num, 1);
 
 	if (cfg->is_dual_lane_phy) {
 		qcom_qmp_phy_pcie_configure_lane(qphy->rx2, cfg->regs,
 						 cfg->pri.rx_tbl, cfg->pri.rx_tbl_num, 2);
 		qcom_qmp_phy_pcie_configure_lane(qphy->rx2, cfg->regs,
-						 cfg->sec.rx_tbl, cfg->sec.rx_tbl_num, 2);
+						 qphy->sec->rx_tbl, qphy->sec->rx_tbl_num, 2);
 	}
 
 	qcom_qmp_phy_pcie_configure(pcs, cfg->regs, cfg->pri.pcs_tbl, cfg->pri.pcs_tbl_num);
-	qcom_qmp_phy_pcie_configure(pcs, cfg->regs, cfg->sec.pcs_tbl, cfg->sec.pcs_tbl_num);
+	qcom_qmp_phy_pcie_configure(pcs, cfg->regs, qphy->sec->pcs_tbl, qphy->sec->pcs_tbl_num);
 
 	qcom_qmp_phy_pcie_configure(pcs_misc, cfg->regs, cfg->pri.pcs_misc_tbl,
 			       cfg->pri.pcs_misc_tbl_num);
-	qcom_qmp_phy_pcie_configure(pcs_misc, cfg->regs, cfg->sec.pcs_misc_tbl,
-			       cfg->sec.pcs_misc_tbl_num);
+	qcom_qmp_phy_pcie_configure(pcs_misc, cfg->regs, qphy->sec->pcs_misc_tbl,
+			       qphy->sec->pcs_misc_tbl_num);
 
 	/*
 	 * Pull out PHY from POWER DOWN state.
@@ -2187,6 +2193,11 @@ static int qcom_qmp_phy_pcie_set_mode(struct phy *phy,
 
 	qphy->mode = mode;
 
+	if (submode)
+		qphy->sec = &qphy->cfg->sec_ep;
+	else
+		qphy->sec = &qphy->cfg->sec_rc;
+
 	return 0;
 }
 
-- 
2.35.1




[Index of Archives]     [DMA Engine]     [Linux Coverity]     [Linux USB]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Greybus]

  Powered by Linux