**Bjorn Helgaas<bjorn.helgaas@xxxxxx> <http://marc.info/?a=105422952700001&r=1&w=2>** wrote:
On Tuesday, August 31, 2010 03:21:05 pm Brian C. Huffman wrote:
> I have an Intel DP43BF motherboard with 4 PCI slots, 2 PCIe x1 and 1 PCIe x16 \
> slots. With 2.6.36-rc2-git5 (as well as stable 2.6.34 and .35), the kernel doesn't \
> see my conventional PCI devices. They can be seen with dmidecode but do not show \
> up with lspci. I've tried pci=noacpi, pci=use_crs and while it takes the options, \
> it doesn't change the visibility of the devices.
> These same devices (a PVR250,Maudio Delta DiO, and Fusion HD DVB card) previously \
> worked with another motherboard.
> Here's the lspci:
> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
> ...and dmidecode:
> [snip]
> Handle 0x0036, DMI type 9, 17 bytes
> System Slot Information
> Designation: PCI Slot
> Type: 32-bit PCI
> Current Usage: In Use
> Length: Short
> ID: 3
> Characteristics:
> 3.3 V is provided
> Opening is shared
> PME signal is supported
> Bus Address: 0000:00:1e.0
> Is there anything else I should include to help troubleshoot?
It looks like your PCI devices should be on the bus behind the
bridge at 1e.0. Can you collect a dmesg log? That will have
information about the PCI probe process.
Are the PCI cards electrically compatible with the slots? Are
there any BIOS options related to the conventional PCI bridge
or enabling/disabling those slots? They're not hot-plug slots
with open latches? Have you ever seen any card work in those
slots, with any kernel?
As far as I know, the PCI cards are electrically compatible. The board documentation says only
"Conventional PCI Slots." I think it also mentions PCI 2.3 compliant. There do not appear to
be any BIOS options that relate to the bridge. This is a new board, so I have not seen any
other cards work with any other kernel. I have tried about 4 different kernels though - some
fedora and some vanilla.
FYI - I just loaded Windows XP SP2 and have verified that it can see the cards and that they all
work as expected, so I would assume that answers the "electrically compatible" question above.
See following dmesg:
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.35-0.57.rc6.git1.fc14.x86_64 (mockbuild@xxxxxxxxxxxxxxxxxxxxxxxxxxxxx) (gcc
version 4.5.0 20100716 (Red Hat 4.5.0-3) (GCC) ) #1 SMP Mon Jul 26 22:43:02 UTC 2010
Command line: initrd=initrd0.img root=live:CDLABEL=Fedora-14-Alpha-x86_64-Live rootfstype=aut
o ro liveimg quiet rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM BOOT_IMAGE=vmlinuz0
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009cc00 (usable)
BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f471000 (usable)
BIOS-e820: 000000007f471000 - 000000007f4f3000 (ACPI NVS)
BIOS-e820: 000000007f4f3000 - 000000007f618000 (reserved)
BIOS-e820: 000000007f618000 - 000000007f619000 (usable)
BIOS-e820: 000000007f619000 - 000000007f623000 (ACPI data)
BIOS-e820: 000000007f623000 - 000000007f62d000 (ACPI NVS)
BIOS-e820: 000000007f62d000 - 000000007f64b000 (reserved)
BIOS-e820: 000000007f64b000 - 000000007f68e000 (ACPI NVS)
BIOS-e820: 000000007f68e000 - 000000007f800000 (usable)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.6 present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x7f800 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07F800000 mask FFFF00000 write-through
2 base 07F900000 mask FFFF00000 uncachable
3 base 07FA00000 mask FFFE00000 uncachable
4 base 07FC00000 mask FFFC00000 uncachable
5 disabled
6 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
found SMP MP-table at [ffff8800000fcd50] fcd50
init_memory_mapping: 0000000000000000-000000007f800000
0000000000 - 007f800000 page 2M
kernel direct mapping tables up to 7f800000 @ 8000-b000
RAMDISK: 7ec64000 - 7f450000
ACPI: RSDP 00000000000f0410 00024 (v02 INTEL)
ACPI: XSDT 000000007f621e18 00044 (v01 INTEL DP43BF 00000046 MSFT 00010013)
ACPI: FACP 000000007f620d98 000F4 (v04 INTEL DP43BF 00000046 MSFT 00010013)
ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20100428/tbfadt-369)
ACPI Warning: 32/64X FACS address mismatch in FADT - 0x7F629F40/0x000000007F62AE40, using 32
(20100428/tbfadt-486)
ACPI: DSDT 000000007f619018 061CA (v01 INTEL DP43BF 00000046 INTL 20051117)
ACPI: FACS 000000007f629f40 00040
ACPI: APIC 000000007f620f18 0006C (v02 INTEL DP43BF 00000046 MSFT 00010013)
ACPI: MCFG 000000007f622f18 0003C (v01 INTEL DP43BF 00000046 MSFT 00000097)
ACPI: HPET 000000007f622e98 00038 (v01 INTEL DP43BF 00000046 AMI. 00000003)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000007f800000
Initmem setup node 0 0000000000000000-000000007f800000
NODE_DATA [0000000002a391c0 - 0000000002a4e1bf]
bootmap [0000000002a4f000 - 0000000002a5eeff] pages 10
(13/32 early reservations) ==> bootmem [0000000000 - 007f800000]
#0 [0001000000 - 0002a388c0] TEXT DATA BSS ==> [0001000000 - 0002a388c0]
#1 [007ec64000 - 007f450000] RAMDISK ==> [007ec64000 - 007f450000]
#2 [0002a39000 - 0002a39189] BRK ==> [0002a39000 - 0002a39189]
#3 [00000fcd60 - 0000100000] BIOS reserved ==> [00000fcd60 - 0000100000]
#4 [00000fcd50 - 00000fcd60] MP-table mpf ==> [00000fcd50 - 00000fcd60]
#5 [000009cc00 - 00000fc9f0] BIOS reserved ==> [000009cc00 - 00000fc9f0]
#6 [00000fccdc - 00000fcd50] BIOS reserved ==> [00000fccdc - 00000fcd50]
#7 [00000fc9f0 - 00000fccdc] MP-table mpc ==> [00000fc9f0 - 00000fccdc]
#8 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000]
#9 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
#10 [0000008000 - 0000009000] PGTABLE ==> [0000008000 - 0000009000]
#11 [0002a391c0 - 0002a4e1c0] NODE_DATA ==> [0002a391c0 - 0002a4e1c0]
#12 [0002a4f000 - 0002a5f000] BOOTMAP ==> [0002a4f000 - 0002a5f000]
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880003400000-ffff880004ffffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal empty
Movable zone start PFN for each node
early_node_map[4] active PFN ranges
0: 0x00000001 -> 0x0000009c
0: 0x00000100 -> 0x0007f471
0: 0x0007f618 -> 0x0007f619
0: 0x0007f68e -> 0x0007f800
On node 0 totalpages: 521599
DMA zone: 56 pages used for memmap
DMA zone: 105 pages reserved
DMA zone: 3834 pages, LIFO batch:0
DMA32 zone: 7084 pages used for memmap
DMA32 zone: 510520 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 4 CPUs, 2 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009c000 - 000000000009d000
PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 000000007f471000 - 000000007f4f3000
PM: Registered nosave memory: 000000007f4f3000 - 000000007f618000
PM: Registered nosave memory: 000000007f619000 - 000000007f623000
PM: Registered nosave memory: 000000007f623000 - 000000007f62d000
PM: Registered nosave memory: 000000007f62d000 - 000000007f64b000
PM: Registered nosave memory: 000000007f64b000 - 000000007f68e000
Allocating PCI resources starting at 7f800000 (gap: 7f800000:7f51c000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 478 pages/cpu @ffff880005600000 s1927360 r8192 d22336 u2097152
pcpu-alloc: s1927360 r8192 d22336 u2097152 alloc=1*2097152
pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 514354
Policy zone: DMA32
Kernel command line: initrd=initrd0.img root=live:CDLABEL=Fedora-14-Alpha-x86_64-Live rootfst
ype=auto ro liveimg quiet rhgb rd_NO_LUKS rd_NO_MD rd_NO_DM BOOT_IMAGE=vmlinuz0
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2014284k/2088960k available (4740k kernel code, 2564k absent, 72112k reserved, 7161k
data, 2756k init)
SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU lockdep checking is enabled.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:33024 nr_irqs:712
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
... MAX_LOCKDEP_SUBCLASSES: 8
... MAX_LOCK_DEPTH: 48
... MAX_LOCKDEP_KEYS: 8191
... CLASSHASH_SIZE: 4096
... MAX_LOCKDEP_ENTRIES: 16384
... MAX_LOCKDEP_CHAINS: 32768
... CHAINHASH_SIZE: 16384
memory used by lock dependency info: 6367 kB
per task-struct memory footprint: 2688 bytes
allocated 20971520 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
ODEBUG: 13 of 13 active objects replaced
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2526.735 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5053.47 BogoMIPS (
lpj=2526735)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100428
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 23954 entries in 94 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU E7200 @ 2.53GHz stepping 06
lockdep: fixing up alternatives.
===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
kernel/sched.c:616 invoked rcu_dereference_check() without protection!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 0
3 locks held by swapper/1:
#0: (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff81052b57>] cpu_maps_update_begin+0x17/0x19
#1: (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff81052a6a>] cpu_hotplug_begin+0x2c/0x53
#2: (&rq->lock){-.-...}, at: [<ffffffff814919e9>] init_idle+0x30/0x131
stack backtrace:
Pid: 1, comm: swapper Not tainted 2.6.35-0.57.rc6.git1.fc14.x86_64 #1
Call Trace:
[<ffffffff8107bc56>] lockdep_rcu_dereference+0xaa/0xb3 [<ffffffff8103fceb>] task_group+0x80/0x8f
[<ffffffff8103fd11>] set_task_rq+0x17/0x73
[<ffffffff81491aa3>] init_idle+0xea/0x131
[<ffffffff81491e73>] fork_idle+0x92/0xa3
[<ffffffff8107e73c>] ? mark_held_locks+0x50/0x72
[<ffffffff8148f919>] do_fork_idle+0x1c/0x2d
[<ffffffff8148fa61>] do_boot_cpu+0x137/0x9ac
[<ffffffff8148f8fd>] ? do_fork_idle+0x0/0x2d
[<ffffffff81490afa>] native_cpu_up+0x100/0x1c2
[<ffffffff81491f4c>] _cpu_up+0x9d/0xf9
[<ffffffff8149207b>] cpu_up+0xd3/0xe5
[<ffffffff81d78d86>] kernel_init+0x105/0x2c9
[<ffffffff8100aae4>] kernel_thread_helper+0x4/0x10
[<ffffffff81499250>] ? restore_args+0x0/0x30
[<ffffffff81d78c81>] ? kernel_init+0x0/0x2c9
[<ffffffff8100aae0>] ? kernel_thread_helper+0x0/0x10
Booting Node 0, Processors #1
Brought up 2 CPUs
Total of 2 processors activated (10107.20 BogoMIPS).
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=1168 bytes
sizeof(dentry)=256 bytes
sizeof(ext3inode)=1600 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=240 bytes
sizeof(task_struct)=9216 bytes
devtmpfs: initialized
atomic64 test passed for x86-64 platform with CX8 and with SSE
Time: 7:45:48 Date: 09/10/10
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab<bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 000000007f624c18 00374 (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00374 (v01 AMI IST 00000001 MSFT 03000001)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in ACPI motherboard resources
ACPI: BIOS _OSI(Linux) query ignored
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0xf0c0-0xf0df]
pci 0000:00:1a.1: reg 20: [io 0xf0a0-0xf0bf]
pci 0000:00:1a.2: reg 20: [io 0xf080-0xf09f]
pci 0000:00:1a.7: reg 10: [mem 0xe3106000-0xe31063ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xe3100000-0xe3103fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0xf060-0xf07f]
pci 0000:00:1d.1: reg 20: [io 0xf040-0xf05f]
pci 0000:00:1d.2: reg 20: [io 0xf020-0xf03f]
pci 0000:00:1d.7: reg 10: [mem 0xe3105000-0xe31053ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0a00 (mask 007f)
pci 0000:00:1f.2: reg 10: [io 0xf190-0xf197]
pci 0000:00:1f.2: reg 14: [io 0xf180-0xf183]
pci 0000:00:1f.2: reg 18: [io 0xf170-0xf177]
pci 0000:00:1f.2: reg 1c: [io 0xf160-0xf163]
pci 0000:00:1f.2: reg 20: [io 0xf150-0xf15f]
pci 0000:00:1f.2: reg 24: [io 0xf140-0xf14f]
pci 0000:00:1f.3: reg 10: [mem 0xe3104000-0xe31040ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf000-0xf01f]
pci 0000:00:1f.5: reg 10: [io 0xf130-0xf137]
pci 0000:00:1f.5: reg 14: [io 0xf120-0xf123]
pci 0000:00:1f.5: reg 18: [io 0xf110-0xf117]
pci 0000:00:1f.5: reg 1c: [io 0xf100-0xf103]
pci 0000:00:1f.5: reg 20: [io 0xf0f0-0xf0ff]
pci 0000:00:1f.5: reg 24: [io 0xf0e0-0xf0ef]
pci 0000:01:00.0: reg 10: [mem 0xe2000000-0xe2ffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xe0000000-0xe1ffffff 64bit]
pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
pci 0000:01:00.0: reg 30: [mem 0xe3000000-0xe301ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe30fffff]
pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:02:00.0: reg 10: [io 0xd040-0xd047]
pci 0000:02:00.0: reg 14: [io 0xd030-0xd033]
pci 0000:02:00.0: reg 18: [io 0xd020-0xd027]
pci 0000:02:00.0: reg 1c: [io 0xd010-0xd013]
pci 0000:02:00.0: reg 20: [io 0xd000-0xd00f]
pci 0000:02:00.0: reg 24: [mem 0xe8400000-0xe84001ff]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:02:00.0: PME# disabled
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=f
orce'
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xe8400000-0xe84fffff]
pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1c.3: PCI bridge to [bus 05-05]
pci 0000:00:1c.3: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:06:00.0: reg 10: [mem 0xe8300000-0xe83007ff 64bit]
pci 0000:06:00.0: reg 18: [io 0xc000-0xc0ff]
pci 0000:06:00.0: supports D2
pci 0000:06:00.0: PME# supported from D2 D3hot D3cold
pci 0000:06:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 06-06]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xe8300000-0xe83fffff]
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:07:00.0: reg 10: [mem 0xe8200000-0xe820ffff 64bit]
pci 0000:07:00.0: PME# supported from D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:00:1c.5: PCI bridge to [bus 07-07]
pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.5: bridge window [mem 0xe8200000-0xe82fffff]
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: PCI bridge to [bus 20-08] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:1e.0: bridge window [mem 0xe4000000-0xe80fffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009cc00 - 000000000009ffff
reserve RAM buffer: 000000007f471000 - 000000007fffffff
reserve RAM buffer: 000000007f619000 - 000000007fffffff
reserve RAM buffer: 000000007f800000 - 000000007fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 4 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:01: [mem 0xf0000000-0xf7ffffff] has been reserved
system 00:01: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee0ffff] has been reserved
system 00:02: [io 0x0a00-0x0a1f] has been reserved
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:0b: [io 0x0400-0x047f] has been reserved
system 00:0b: [io 0x1180-0x119f] has been reserved
system 00:0b: [io 0x0500-0x057f] could not be reserved
system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0b: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0b: [mem 0xff000000-0xffffffff] has been reserved
pci 0000:00:1c.0: BAR 15: assigned [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.1: BAR 14: assigned [mem 0x80200000-0x803fffff]
pci 0000:00:1c.1: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
pci 0000:00:1c.2: BAR 14: assigned [mem 0x80600000-0x807fffff]
pci 0000:00:1c.2: BAR 15: assigned [mem 0x80800000-0x809fffff 64bit pref]
pci 0000:00:1c.3: BAR 14: assigned [mem 0x80a00000-0x80bfffff]
pci 0000:00:1c.3: BAR 15: assigned [mem 0x80c00000-0x80dfffff 64bit pref]
pci 0000:00:1c.4: BAR 15: assigned [mem 0x80e00000-0x80ffffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0x81000000-0x811fffff 64bit pref]
pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.2: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.3: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:1c.5: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xe30fffff]
pci 0000:00:01.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.0: bridge window [mem 0xe8400000-0xe84fffff]
pci 0000:00:1c.0: bridge window [mem 0x80000000-0x801fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.1: bridge window [mem 0x80200000-0x803fffff]
pci 0000:00:1c.1: bridge window [mem 0x80400000-0x805fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 04-04]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0x80600000-0x807fffff]
pci 0000:00:1c.2: bridge window [mem 0x80800000-0x809fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-05]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0x80a00000-0x80bfffff]
pci 0000:00:1c.3: bridge window [mem 0x80c00000-0x80dfffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 06-06]
pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.4: bridge window [mem 0xe8300000-0xe83fffff]
pci 0000:00:1c.4: bridge window [mem 0x80e00000-0x80ffffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 07-07]
pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.5: bridge window [mem 0xe8200000-0xe82fffff]
pci 0000:00:1c.5: bridge window [mem 0x81000000-0x811fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 20-08]
pci 0000:00:1e.0: bridge window [io 0xb000-0xbfff]
pci 0000:00:1e.0: bridge window [mem 0xe4000000-0xe80fffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
alloc irq_desc for 16 on node -1
alloc kstat_irqs on node -1
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 17 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 18 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
alloc irq_desc for 19 on node -1
alloc kstat_irqs on node -1
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xd0000000-0xe30fffff]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xe8400000-0xe84fffff]
pci_bus 0000:02: resource 2 [mem 0x80000000-0x801fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:03: resource 1 [mem 0x80200000-0x803fffff]
pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0x80600000-0x807fffff]
pci_bus 0000:04: resource 2 [mem 0x80800000-0x809fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:05: resource 1 [mem 0x80a00000-0x80bfffff]
pci_bus 0000:05: resource 2 [mem 0x80c00000-0x80dfffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:06: resource 1 [mem 0xe8300000-0xe83fffff]
pci_bus 0000:06: resource 2 [mem 0x80e00000-0x80ffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:07: resource 1 [mem 0xe8200000-0xe82fffff]
pci_bus 0000:07: resource 2 [mem 0x81000000-0x811fffff 64bit pref]
pci_bus 0000:20: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:20: resource 1 [mem 0xe4000000-0xe80fffff]
pci_bus 0000:20: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:20: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:20: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:20: resource 7 [mem 0x80000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 10, 4718592 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 5, 163840 bytes)
UDP-Lite hash table entries: 1024 (order: 5, 163840 bytes)
NET: Registered protocol family 1
pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
pci 0000:01:00.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 8112k freed
DMA-API: preallocated 32768 debug entries
DMA-API: debugging enabled by kernel config
audit: initializing netlink socket (disabled)
type=2000 audit(1284104750.917:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 3949
SELinux: Registering netfilter hooks
cryptomgr_test used greatest stack depth: 6016 bytes left
cryptomgr_test used greatest stack depth: 5944 bytes left
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 40 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 41 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
alloc irq_desc for 42 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
pcieport 0000:00:1c.2: setting latency timer to 64
alloc irq_desc for 43 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
pcieport 0000:00:1c.3: setting latency timer to 64
alloc irq_desc for 44 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
pcieport 0000:00:1c.4: setting latency timer to 64
alloc irq_desc for 45 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
pcieport 0000:00:1c.5: setting latency timer to 64
alloc irq_desc for 46 on node -1
alloc kstat_irqs on node -1
pcieport 0000:00:1c.5: irq 46 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 3a40 ss_vid 8086 ss_did 29
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.1:pcie04: HPC vendor_id 8086 device_id 3a42 ss_vid 8086 ss_did 29
pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.2:pcie04: HPC vendor_id 8086 device_id 3a44 ss_vid 8086 ss_did 29
pciehp 0000:00:1c.2:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.3:pcie04: HPC vendor_id 8086 device_id 3a46 ss_vid 8086 ss_did 29
pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.4:pcie04: HPC vendor_id 8086 device_id 3a48 ss_vid 8086 ss_did 29
pciehp 0000:00:1c.4:pcie04: service driver pciehp loaded
pciehp 0000:00:1c.5:pcie04: HPC vendor_id 8086 device_id 3a4a ss_vid 8086 ss_did 29
pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
pci-stub: invalid id string ""
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Marking TSC unstable due to TSC halts in idle
Switching to clocksource hpet
ERST: Table is not found!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0xf190 ctl 0xf180 bmdma 0xf150 irq 19
ata2: SATA max UDMA/133 cmd 0xf170 ctl 0xf160 bmdma 0xf158 irq 19
ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xf130 ctl 0xf120 bmdma 0xf0f0 irq 19
ata4: SATA max UDMA/133 cmd 0xf110 ctl 0xf100 bmdma 0xf0f8 irq 19
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe3106000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.35-0.57.rc6.git1.fc14.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
alloc irq_desc for 23 on node -1
alloc kstat_irqs on node -1
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe3105000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.35-0.57.rc6.git1.fc14.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000f0c0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.35-0.57.rc6.git1.fc14.x86_64 uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
alloc irq_desc for 21 on node -1
alloc kstat_irqs on node -1
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000f0a0
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.35-0.57.rc6.git1.fc14.x86_64 uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000f080
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.35-0.57.rc6.git1.fc14.x86_64 uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000f060
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.35-0.57.rc6.git1.fc14.x86_64 uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000f040
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.35-0.57.rc6.git1.fc14.x86_64 uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
<snip>
Hopefully that's enough. I don't see much else PCI related below that.
Thanks,
Brian
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
