+ Kishon and Roger Ok, so in fact that's a complete series now. [v2,1/5] arm: omap5: dts: fix reg property size [v2,2/5] arm: omap5: dts: fix ocp2scp DTS data [v2,3/5] arm: omap5: dts: add palmas-usb node [v2,4/5] arm: omap5: hwmod: add missing ocp2scp hwmod data [v2,5/5] arm: omap2plus_defconfig: enable dwc3 and dependencies Moreover, it does not build because of the change in the palmas SMPS10 regulator name from Kishon I already pulled. Kishon or Roger, Could you resend that series ASAP after fixing, testing and changing my email address? Tony, I will need your ack for the omap2plus_defconfig patch. Thanks, Benoit On 21/08/2013 11:48, Benoit Cousson wrote: > Gosh, I've just realized it does contain some DTS stuff in it as well :-( > I should have pushed it in my DTS branch. > > Benoit > > > 2013/8/21 Benoit Cousson <bcousson@xxxxxxxxxxxx > <mailto:bcousson@xxxxxxxxxxxx>> > > On 21/08/2013 09:47, Tony Lindgren wrote: > > Benoit, > > Got this one queued up somewhere? > > > No yet. That's the only hwmod patch I have so far. > I'll put it in a branch and send you the pull-request ASAP. > > Regards, > Benoit > > > > * Felipe Balbi <balbi@xxxxxx <mailto:balbi@xxxxxx>> [130712 08:21]: > > From: Benoit Cousson <benoit.cousson@xxxxxxxxxx > <mailto:benoit.cousson@xxxxxxxxxx>> > > without that hwmod data, USB3 will not in OMAP5 boards. > > While at that, also fix DTS data to pass reg property, > otherwise driver won't probe. > > Signed-off-by: Benoit Cousson <benoit.cousson@xxxxxxxxxx > <mailto:benoit.cousson@xxxxxxxxxx>> > Signed-off-by: Felipe Balbi <balbi@xxxxxx <mailto:balbi@xxxxxx>> > --- > > tested on OMAP5 uEVM. Gets rid of a data abort when USB3 > is enabled. There still some other patches missing to get > USB3 working out of the box, but that's on Palmas and will > come as soon as I get those ready. > > This is already on step forward. > > arch/arm/boot/dts/omap5.dtsi | 3 +- > arch/arm/mach-omap2/omap___hwmod_54xx_data.c | 45 > ++++++++++++++++++++++++++++++ > 2 files changed, 47 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/boot/dts/omap5.dtsi > b/arch/arm/boot/dts/omap5.dtsi > index da41d70..a0de586 100644 > --- a/arch/arm/boot/dts/omap5.dtsi > +++ b/arch/arm/boot/dts/omap5.dtsi > @@ -654,10 +654,11 @@ > }; > }; > > - ocp2scp { > + ocp2scp@4a080000 { > compatible = "ti,omap-ocp2scp"; > #address-cells = <1>; > #size-cells = <1>; > + reg = <0x4a080000 0x20>; > ranges; > ti,hwmods = "ocp2scp1"; > usb2_phy: usb2phy@4a084000 { > diff --git a/arch/arm/mach-omap2/omap___hwmod_54xx_data.c > b/arch/arm/mach-omap2/omap___hwmod_54xx_data.c > index 2435109..d9118a1 100644 > --- a/arch/arm/mach-omap2/omap___hwmod_54xx_data.c > +++ b/arch/arm/mach-omap2/omap___hwmod_54xx_data.c > @@ -1105,6 +1105,42 @@ static struct omap_hwmod > omap54xx_mpu_hwmod = { > }; > > /* > + * 'ocp2scp' class > + * bridge to transform ocp interface protocol to scp > (serial control port) > + * protocol > + */ > + > +static struct omap_hwmod_class_sysconfig > omap54xx_ocp2scp_sysc = { > + .rev_offs = 0x0000, > + .sysc_offs = 0x0010, > + .syss_offs = 0x0014, > + .sysc_flags = (SYSC_HAS_AUTOIDLE | > SYSC_HAS_SIDLEMODE | > + SYSC_HAS_SOFTRESET | > SYSS_HAS_RESET_STATUS), > + .idlemodes = (SIDLE_FORCE | SIDLE_NO | > SIDLE_SMART), > + .sysc_fields = &omap_hwmod_sysc_type1, > +}; > + > +static struct omap_hwmod_class omap54xx_ocp2scp_hwmod_class = { > + .name = "ocp2scp", > + .sysc = &omap54xx_ocp2scp_sysc, > +}; > + > +/* ocp2scp1 */ > +static struct omap_hwmod omap54xx_ocp2scp1_hwmod = { > + .name = "ocp2scp1", > + .class = &omap54xx_ocp2scp_hwmod_class, > + .clkdm_name = "l3init_clkdm", > + .main_clk = "l4_root_clk_div", > + .prcm = { > + .omap4 = { > + .clkctrl_offs = > OMAP54XX_CM_L3INIT_OCP2SCP1___CLKCTRL_OFFSET, > + .context_offs = > OMAP54XX_RM_L3INIT_OCP2SCP1___CONTEXT_OFFSET, > + .modulemode = MODULEMODE_HWCTRL, > + }, > + }, > +}; > + > +/* > * 'timer' class > * general purpose timer module with accurate 1ms tick > * This class contains several variants: ['timer_1ms', > 'timer'] > @@ -1900,6 +1936,14 @@ static struct omap_hwmod_ocp_if > omap54xx_l4_cfg__mpu = { > .user = OCP_USER_MPU | OCP_USER_SDMA, > }; > > +/* l4_cfg -> ocp2scp1 */ > +static struct omap_hwmod_ocp_if omap54xx_l4_cfg__ocp2scp1 = { > + .master = &omap54xx_l4_cfg_hwmod, > + .slave = &omap54xx_ocp2scp1_hwmod, > + .clk = "l4_root_clk_div", > + .user = OCP_USER_MPU | OCP_USER_SDMA, > +}; > + > /* l4_wkup -> timer1 */ > static struct omap_hwmod_ocp_if omap54xx_l4_wkup__timer1 = { > .master = &omap54xx_l4_wkup_hwmod, > @@ -2102,6 +2146,7 @@ static struct omap_hwmod_ocp_if > *omap54xx_hwmod_ocp_ifs[] __initdata = { > &omap54xx_l4_per__mmc4, > &omap54xx_l4_per__mmc5, > &omap54xx_l4_cfg__mpu, > + &omap54xx_l4_cfg__ocp2scp1, > &omap54xx_l4_wkup__timer1, > &omap54xx_l4_per__timer2, > &omap54xx_l4_per__timer3, > -- > 1.8.2.1 > > > > > > -- > *Benoît Cousson* > CTO > BayLibre - Incubateur PACA Est > Business Pole > 1047 route des Dolines, Accès Allée Pierre Ziller, Entrée A > 06560 Valbonne Sophia Antipolis -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
