From: Benoit Cousson <benoit.cousson@xxxxxxxxxx>
without that hwmod data, USB3 will not in OMAP5 boards.
While at that, also fix DTS data to pass reg property,
otherwise driver won't probe.
Signed-off-by: Benoit Cousson <benoit.cousson@xxxxxxxxxx>
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
tested on OMAP5 uEVM. Gets rid of a data abort when USB3
is enabled. There still some other patches missing to get
USB3 working out of the box, but that's on Palmas and will
come as soon as I get those ready.
This is already on step forward.
arch/arm/boot/dts/omap5.dtsi | 3 +-
arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 45 ++++++++++++++++++++++++++++++
2 files changed, 47 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index da41d70..a0de586 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -654,10 +654,11 @@
};
};
- ocp2scp {
+ ocp2scp@4a080000 {
compatible = "ti,omap-ocp2scp";
#address-cells = <1>;
#size-cells = <1>;
+ reg = <0x4a080000 0x20>;
ranges;
ti,hwmods = "ocp2scp1";
usb2_phy: usb2phy@4a084000 {
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 2435109..d9118a1 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -1105,6 +1105,42 @@ static struct omap_hwmod omap54xx_mpu_hwmod = {
};
/*
+ * 'ocp2scp' class
+ * bridge to transform ocp interface protocol to scp (serial control port)
+ * protocol
+ */
+
+static struct omap_hwmod_class_sysconfig omap54xx_ocp2scp_sysc = {
+ .rev_offs = 0x0000,
+ .sysc_offs = 0x0010,
+ .syss_offs = 0x0014,
+ .sysc_flags = (SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE |
+ SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap54xx_ocp2scp_hwmod_class = {
+ .name = "ocp2scp",
+ .sysc = &omap54xx_ocp2scp_sysc,
+};
+
+/* ocp2scp1 */
+static struct omap_hwmod omap54xx_ocp2scp1_hwmod = {
+ .name = "ocp2scp1",
+ .class = &omap54xx_ocp2scp_hwmod_class,
+ .clkdm_name = "l3init_clkdm",
+ .main_clk = "l4_root_clk_div",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = OMAP54XX_CM_L3INIT_OCP2SCP1_CLKCTRL_OFFSET,
+ .context_offs = OMAP54XX_RM_L3INIT_OCP2SCP1_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_HWCTRL,
+ },
+ },
+};
+
+/*
* 'timer' class
* general purpose timer module with accurate 1ms tick
* This class contains several variants: ['timer_1ms', 'timer']
@@ -1900,6 +1936,14 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* l4_cfg -> ocp2scp1 */
+static struct omap_hwmod_ocp_if omap54xx_l4_cfg__ocp2scp1 = {
+ .master = &omap54xx_l4_cfg_hwmod,
+ .slave = &omap54xx_ocp2scp1_hwmod,
+ .clk = "l4_root_clk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
/* l4_wkup -> timer1 */
static struct omap_hwmod_ocp_if omap54xx_l4_wkup__timer1 = {
.master = &omap54xx_l4_wkup_hwmod,
@@ -2102,6 +2146,7 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
&omap54xx_l4_per__mmc4,
&omap54xx_l4_per__mmc5,
&omap54xx_l4_cfg__mpu,
+ &omap54xx_l4_cfg__ocp2scp1,
&omap54xx_l4_wkup__timer1,
&omap54xx_l4_per__timer2,
&omap54xx_l4_per__timer3,
--
1.8.2.1
