Am 29.07.2013 10:17, schrieb Javier Martinez Canillas: > Hi Alexander, > > On Mon, Jul 29, 2013 at 8:41 AM, Alexander Holler <holler@xxxxxxxxxxxxx> wrote: >> Am 28.07.2013 21:06, schrieb Javier Martinez Canillas: >> >>> On Sun, Jul 28, 2013 at 8:22 PM, Linus Walleij <linus.walleij@xxxxxxxxxx> >>> wrote: >>>> >>>> On Sun, Jul 28, 2013 at 7:33 PM, Javier Martinez Canillas >>>> <martinez.javier@xxxxxxxxx> wrote: >>>> >>>>> According to Documentation/devicetree/bindings/mmc/mmc.txt: >>>>> >>>>> cd-gpios: Specify GPIOs for card detection, see gpio binding >>>>> >>>>> So it just says that it is a GPIO for card detection and not an IRQ so >>>>> this assumption comes from either the omap_hsmmc driver or Alexander' >>>>> DTS is missing something like: >>>>> >>>>> interrupt-parent = <&gpio6>; >>>>> interrupts = <16 8>; >> >> >> What do the values 16 and 8 mean here? GPIO numbers? >> And where do I have to place that? >> > > If you look at Documentation/devicetree/bindings/interrupt-controller/interrupts.txt > for the two cells interrupt controllers definition: > > b) two cells > ------------ > The #interrupt-cells property is set to 2 and the first cell defines the > index of the interrupt within the controller, while the second cell is used I had read that. And there is written, "index of the interrupt". So may I ask the question how you think people are translating GPIO number to interrupt index?. And if it's the same, will GPIO0_0 map to IRQ 0 or how is the magic formular people are supposed to use? Besides that, the existing standard DTS I've modified into my "non-standard" dts is arch/arm/boot/dts/am335x-bone.dts. if you look at the definition of the GPIO bank 0 in arch/arm/boot/dts/am33xx.dtsi, you see #interrupt-cells = <1>; Anyway, thanks for your time, but I don't want to spend more time on that topic. Regards, Alexander Holler -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
