When a GPIO is defined as an interrupt line using Device
Tree, a call to irq_create_of_mapping() is made that calls
irq_create_mapping(). So, is not necessary to do the mapping
for all OMAP GPIO lines and explicitly call irq_create_mapping()
on the driver probe() when booting with Device Tree.
Add a custom IRQ domain .map function handler that will be
called by irq_create_mapping() to map the GPIO lines used as IRQ.
This also allows to execute needed setup code such as configuring
a GPIO as input and enabling the GPIO bank.
Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
Tested-by: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
Acked-by: Grant Likely <grant.likely@xxxxxxxxxxxx>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
---
Changes since v3:
- Use bank->chip.of_node instead of_have_populated_dt() to check
DT or legacy boot as suggested by Jean-Christophe PLAGNIOL-VILLARD
Changes since v2:
- Unconditionally do the IRQ setup in the .map() function and
only call irq_create_mapping() in the gpio chip init to avoid
code duplication as suggested by Grant Likely.
Changes since v1:
- Split the addition of the .map function handler and the
automatic gpio request in two different patches.
- Add GPIO IRQ setup logic to the irq domain mapping function.
- Only call irq_create_mapping for every GPIO on legacy boot.
- Only setup a GPIO IRQ on the .map function for DeviceTree boot.
drivers/gpio/gpio-omap.c | 54 ++++++++++++++++++++++++++++++++++------------
1 files changed, 40 insertions(+), 14 deletions(-)
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index 4a43036..e260590 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1068,24 +1068,50 @@ static void omap_gpio_chip_init(struct gpio_bank *bank)
gpiochip_add(&bank->chip);
- for (j = 0; j < bank->width; j++) {
- int irq = irq_create_mapping(bank->domain, j);
- irq_set_lockdep_class(irq, &gpio_lock_class);
- irq_set_chip_data(irq, bank);
- if (bank->is_mpuio) {
- omap_mpuio_alloc_gc(bank, irq, bank->width);
- } else {
- irq_set_chip_and_handler(irq, &gpio_irq_chip,
- handle_simple_irq);
- set_irq_flags(irq, IRQF_VALID);
- }
- }
+ /*
+ * REVISIT these explicit calls to irq_create_mapping()
+ * to do the GPIO to IRQ domain mapping for each GPIO in
+ * the bank can be removed once all OMAP platforms have
+ * been migrated to Device Tree boot only.
+ * Since in DT boot irq_create_mapping() is called from
+ * irq_create_of_mapping() only for the GPIO lines that
+ * are used as interrupts.
+ */
+ if (!bank->chip.of_node)
+ for (j = 0; j < bank->width; j++)
+ irq_create_mapping(bank->domain, j);
irq_set_chained_handler(bank->irq, gpio_irq_handler);
irq_set_handler_data(bank->irq, bank);
}
static const struct of_device_id omap_gpio_match[];
+static int omap_gpio_irq_map(struct irq_domain *d, unsigned int virq,
+ irq_hw_number_t hwirq)
+{
+ struct gpio_bank *bank = d->host_data;
+
+ if (!bank)
+ return -EINVAL;
+
+ irq_set_lockdep_class(virq, &gpio_lock_class);
+ irq_set_chip_data(virq, bank);
+ if (bank->is_mpuio) {
+ omap_mpuio_alloc_gc(bank, virq, bank->width);
+ } else {
+ irq_set_chip_and_handler(virq, &gpio_irq_chip,
+ handle_simple_irq);
+ set_irq_flags(virq, IRQF_VALID);
+ }
+
+ return 0;
+}
+
+static struct irq_domain_ops omap_gpio_irq_ops = {
+ .xlate = irq_domain_xlate_onetwocell,
+ .map = omap_gpio_irq_map,
+};
+
static int omap_gpio_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1151,10 +1177,10 @@ static int omap_gpio_probe(struct platform_device *pdev)
}
bank->domain = irq_domain_add_legacy(node, bank->width, irq_base,
- 0, &irq_domain_simple_ops, NULL);
+ 0, &omap_gpio_irq_ops, bank);
#else
bank->domain = irq_domain_add_linear(node, bank->width,
- &irq_domain_simple_ops, NULL);
+ &omap_gpio_irq_ops, bank);
#endif
if (!bank->domain) {
dev_err(dev, "Couldn't register an IRQ domain\n");
--
1.7.7.6
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
