On 07/15/2013 10:16 AM, Roger Quadros wrote: >>> I can only test on beagle-xm (which is also rev. C2) with integrated SMSC ethernet chip >>> as I don't have an external USB-ethernet adapter. >> >> Too bad. This difference in boards makes the tests a bit less >> meaningful. Is there really no USB-ethernet adapter somewhere in your >> department (perhaps a non-SMSC95xx might serve as well?)? I might >> send/order you one if necessary. ;) > > Thanks for the offer :). I'll just get one for myself by today/tomorrow. > The one available here uses this driver "drivers/net/usb/asix.c" Great. >> >>> The above commit doesn't work well for beagle-xm, >> >> Why is this? What does happen? Does U-Boot not boot up to the prompt? >> Please send me a log. > > The last time it had failed I remember seeing a lot of IO pad configuration errors. > But I'm no longer able to reproduce that problem. Maybe it was just a messed up > build. In case I observe it again I'll let you know. It might be related to a problem with the gd (global-data) pointer being overwritten in den SPL. This is still not finally resolved the upcoming release: http://patchwork.ozlabs.org/patch/251293/ >> >>> so my u-boot is on tag v2013.04 >>> and you don't need that additional patch. >>> >>> Can you please retest on it? Thanks. >> >> Done, please see below. >> >>> You will need to set "usbethaddr" before starting USB else SMSC will not work. >>> e.g. >>> setenv usbethaddr A6:66:4D:B0:69:04 >> >> I don't have a beagle-xm, only my beable. And my U-Boot network setup is >> already working, thanks. > > Right. you won't need that for beagle. It was only for beagle-xm or panda with on board > usb-ethernet. I'm using the (external) USB-ethernet adapter on the beagle in U-Boot as well. To tftp the kernel/dtb. Thanks, Stefan -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
