Hello, Legacy board files use constants from sizes.h and mtd/partitions.h to declare MTD partitions. This series performs the same with DT. Necessary headers are added (patch 1), a NAND node is added to omap3-overo (patch 2), and remaining DTS are converted (patch 3). Patch 2 was tested on the real hardware. For patch 3, the resulting DTB were diff'ed. The MTDPART_SIZ_FULL constant was used in DTS, when it was the case in legacy board files. The size cell is thus changed inside the binary output, so testing on the hardware is welcome, even if it should work transparently. Note that inside omap3430-sdp.dts (nor@0,0), it appears with this series that partitions 'kernel-nor' and 'filesystem-nor' overlaps by (2*SZ_128K), which is probably not desired. Regards, Florian Florian Vaussard (3): ARM: dts: Add headers with constants for MTD partitions ARM: dts: Add omap3-overo NAND flash memory binding ARM: dts: OMAP3: Use MTD constants for OMAP3 boards arch/arm/boot/dts/omap3-devkit8000.dts | 10 +++--- arch/arm/boot/dts/omap3-igep0020.dts | 10 +++--- arch/arm/boot/dts/omap3-igep0030.dts | 10 +++--- arch/arm/boot/dts/omap3-overo.dtsi | 50 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/omap3.dtsi | 2 + arch/arm/boot/dts/omap3430-sdp.dts | 28 ++++++++-------- include/dt-bindings/mtd/partitions.h | 12 +++++++ include/dt-bindings/sizes.h | 52 ++++++++++++++++++++++++++++++++ 8 files changed, 145 insertions(+), 29 deletions(-) create mode 100644 include/dt-bindings/mtd/partitions.h create mode 100644 include/dt-bindings/sizes.h -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
