Hi, On Tue, Jun 04, 2013 at 10:40:37AM +0300, Tomi Valkeinen wrote: > I've made some big changes on the omapdss device model, which involves > converting all the panel drivers. I've got only a bunch of boards, so I > hope some of you can perhaps do some minimal tests on some other boards. > > I've got: Beagle (old one), Panda, 4430SDP, Overo with LCD43. > > The code can be found from the below git branch. It's based on 3.10-rc1. > > git://gitorious.org/linux-omap-dss2/linux.git work/dss-dev-model > > All you need to do to get things working is to enable the new panel > drivers from kernel config, under Device drivers/Graphics support/OMAP2+ > Display Subsystem support/OMAP Display Device Drivers/ I tested Nokia N900 by pulling your tree and doing the following .config changes: # CONFIG_PANEL_ACX565AKM is not set CONFIG_PANEL_SONY_ACX565AKM=y The frame buffer console seems to work OK. A. -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
