PBIAS register configuration is based on the regulator voltage
which supplies these pbias cells, sd i/o pads.
With PBIAS register address and bit definitions different across
omap[3,4,5], Simplify PBIAS configuration under three different
regulator voltage levels - O V, 1.8 V, 3 V. Corresponding pinctrl states
are defined as pbias_off, pbias_1v8, pbias_3v.
pinctrl state mmc_init is used for configuring speed mode, loopback clock
(in devconf0/devconf1/prog_io1 register for omap3) and pull strength
configuration (in control_mmc1 for omap4)
Signed-off-by: Balaji T K <balajitk@xxxxxx>
---
drivers/mmc/host/omap_hsmmc.c | 83 ++++++++++++++++++++++++++++++++++++++--
1 files changed, 78 insertions(+), 5 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 533ced2..8dd1cd3 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -182,6 +182,9 @@ struct omap_hsmmc_host {
int req_in_progress;
struct omap_hsmmc_next next_data;
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pbias_off, *pbias_1v8, *pbias_3v, *mmc_init;
+
struct omap_mmc_platform_data *pdata;
int needs_vmmc:1;
int needs_vmmc_aux:1;
@@ -267,6 +270,12 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
if (mmc_slot(host).before_set_reg)
mmc_slot(host).before_set_reg(dev, slot, power_on, vdd);
+ if (host->pinctrl && host->pbias_off) {
+ ret = pinctrl_select_state(host->pinctrl, host->pbias_off);
+ if (ret < 0)
+ dev_err(host->dev, "pinctrl pbias_off select error\n");
+ }
+
/*
* Assume Vcc regulator is used only to power the card ... OMAP
* VDDS is used to power the pins, optionally with a transceiver to
@@ -304,6 +313,25 @@ static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
if (mmc_slot(host).after_set_reg)
mmc_slot(host).after_set_reg(dev, slot, power_on, vdd);
+ /* 100ms delay required for PBIAS configuration */
+ msleep(100);
+ if (!vdd && host->pinctrl && host->pbias_off) {
+ ret = pinctrl_select_state(host->pinctrl, host->pbias_off);
+ if (ret < 0)
+ dev_err(host->dev, "pinctrl pbias_off select error\n");
+ } else if (((1 << vdd) <= MMC_VDD_165_195) && host->pinctrl &&
+ host->pbias_1v8) {
+ ret = pinctrl_select_state(host->pinctrl, host->pbias_1v8);
+ if (ret < 0)
+ dev_err(host->dev, "pinctrl pbias_1v8 select error\n");
+ } else if (((1 << vdd) > MMC_VDD_165_195) && host->pinctrl &&
+ host->pbias_3v) {
+ ret = pinctrl_select_state(host->pinctrl, host->pbias_3v);
+ if (ret < 0)
+ dev_err(host->dev, "pinctrl pbias_3v select error\n");
+ }
+ usleep_range(350, 400);
+
return ret;
}
@@ -1775,6 +1803,52 @@ static inline struct omap_mmc_platform_data
}
#endif
+static int omap_hsmmc_pinctrl_init(struct omap_hsmmc_host *host)
+{
+ int ret = 0;
+
+ host->pinctrl = devm_pinctrl_get(host->dev);
+ if (IS_ERR(host->pinctrl)) {
+ host->pinctrl = NULL;
+ dev_warn(host->dev,
+ "pins are not configured from the driver\n");
+ return 0;
+ }
+
+ host->mmc_init = pinctrl_lookup_state(host->pinctrl, "mmc_init");
+ if (IS_ERR(host->mmc_init)) {
+ dev_vdbg(host->dev, "optional: mmc_init lookup error");
+ host->mmc_init = NULL;
+ } else {
+ ret = pinctrl_select_state(host->pinctrl, host->mmc_init);
+ if (ret < 0) {
+ dev_err(host->dev, "pinctrl mmc_init select error\n");
+ goto err_pinctrl;
+ }
+ }
+
+ host->pbias_off = pinctrl_lookup_state(host->pinctrl, "pbias_off");
+ if (IS_ERR(host->pbias_off)) {
+ dev_vdbg(host->dev, "optional: pbias_off lookup error");
+ host->pbias_off = NULL;
+ }
+
+ host->pbias_1v8 = pinctrl_lookup_state(host->pinctrl, "pbias_1v8");
+ if (IS_ERR(host->pbias_1v8)) {
+ dev_vdbg(host->dev, "optional: pbias_1v8 lookup error");
+ host->pbias_1v8 = NULL;
+ }
+
+ host->pbias_3v = pinctrl_lookup_state(host->pinctrl, "pbias_3v");
+ if (IS_ERR(host->pbias_3v)) {
+ dev_vdbg(host->dev, "optional: pbias_3v lookup error");
+ host->pbias_3v = NULL;
+ }
+
+err_pinctrl:
+ return ret;
+}
+
static int omap_hsmmc_probe(struct platform_device *pdev)
{
struct omap_mmc_platform_data *pdata = pdev->dev.platform_data;
@@ -1785,7 +1859,6 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
const struct of_device_id *match;
dma_cap_mask_t mask;
unsigned tx_req, rx_req;
- struct pinctrl *pinctrl;
match = of_match_device(of_match_ptr(omap_mmc_of_match), &pdev->dev);
if (match) {
@@ -2005,10 +2078,9 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
omap_hsmmc_disable_irq(host);
- pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
- if (IS_ERR(pinctrl))
- dev_warn(&pdev->dev,
- "pins are not configured from the driver\n");
+ ret = omap_hsmmc_pinctrl_init(host);
+ if (ret)
+ goto err_pinctrl_state;
omap_hsmmc_protect_card(host);
@@ -2034,6 +2106,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
err_slot_name:
mmc_remove_host(mmc);
+err_pinctrl_state:
free_irq(mmc_slot(host).card_detect_irq, host);
err_irq_cd:
omap_hsmmc_reg_put(host);
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
