On 06/04/2013 04:43 PM, Mugunthan V N wrote:
Make use of phy_drivers_register/phy_drivers_unregister to
register/unregister
multiple phy drivers in a single module.
Cc: Matus Ujhelyi <ujhelyi.m@xxxxxxxxx>
Signed-off-by: Mugunthan V N <mugunthanvnm@xxxxxx>
---
drivers/net/phy/at803x.c | 35 ++++++++++-------------------------
1 file changed, 10 insertions(+), 25 deletions(-)
diff --git a/drivers/net/phy/at803x.c b/drivers/net/phy/at803x.c
index 45cbc10..a1063e1 100644
--- a/drivers/net/phy/at803x.c
+++ b/drivers/net/phy/at803x.c
@@ -108,8 +108,9 @@ static int at803x_config_init(struct phy_device
*phydev)
return 0;
}
-/* ATHEROS 8035 */
-static struct phy_driver at8035_driver = {
+static struct phy_driver at803x_driver[] = {
+{
+ /* ATHEROS 8035 */
.phy_id = 0x004dd072,
.name = "Atheros 8035 ethernet",
.phy_id_mask = 0xffffffef,
That's improper indentation. Needs to be shifted by one tab.
This indentation is as per the coding style followed in all ethernet
phy drivers. If this need so to be changed, it must be a separate patch
for all the ethernet phy drivers.
@@ -136,32 +135,18 @@ static struct phy_driver at8030_driver = {
.driver = {
.owner = THIS_MODULE,
},
-};
+} };
Looks ugly...
This is also the same as per the style followed in ethernet phy drivers
Please refer the below grep output
$ grep -rnaI "} };" drivers/net/phy/*
drivers/net/phy/at803x.c:201:} };
drivers/net/phy/bcm63xx.c:101:} };
drivers/net/phy/bcm87xx.c:217:} };
drivers/net/phy/broadcom.c:829:} };
drivers/net/phy/cicada.c:130:} };
drivers/net/phy/davicom.c:183:} };
drivers/net/phy/icplus.c:254:} };
drivers/net/phy/lxt.c:313:} };
drivers/net/phy/micrel.c:323:} };
drivers/net/phy/smsc.c:242:} };
drivers/net/phy/ste10Xp.c:113:} };
drivers/net/phy/vitesse.c:192:} };
Sorry for the noise, coldn't imagine they're all that bad. :-)
Regards
Mugunthan V N
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html