On 11/20/2012 11:23 AM, AnilKumar, Chimata wrote: > On Tue, Nov 20, 2012 at 15:43:04, Marc Kleine-Budde wrote: >> On 11/14/2012 07:08 PM, AnilKumar Ch wrote: >>> Add a new address space/memory resource to d_can device tree node. D_CAN >>> RAM initialization is achieved through RAMINIT register which is part of >>> AM33XX control module address space. D_CAN RAM init or de-init should be >>> done by writing instance corresponding value to control module register. >>> >>> Till we have a separate control module driver to write to control module, >>> d_can driver will handle the register writes to control module by itself. >>> So a new address space to represent this control module register is added >>> to d_can driver. >>> >>> Signed-off-by: AnilKumar Ch <anilkumar@xxxxxx> >> >> This does not apply to net-next/master: >> >> Applying: ARM: dts: AM33XX: Add memory resource to d_can node >> error: patch failed: arch/arm/boot/dts/am33xx.dtsi:227 >> error: arch/arm/boot/dts/am33xx.dtsi: patch does not apply >> Patch failed at 0003 ARM: dts: AM33XX: Add memory resource to d_can node >> > > Marc, > > Sorry about this DT changes are present in linux-omap. > > Could you please take the driver changes only and ACK on remaining will > help. Will do - I'm currently looking at the driver. Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
Attachment:
signature.asc
Description: OpenPGP digital signature
