On Tue, Nov 20, 2012 at 15:43:04, Marc Kleine-Budde wrote: > On 11/14/2012 07:08 PM, AnilKumar Ch wrote: > > Add a new address space/memory resource to d_can device tree node. D_CAN > > RAM initialization is achieved through RAMINIT register which is part of > > AM33XX control module address space. D_CAN RAM init or de-init should be > > done by writing instance corresponding value to control module register. > > > > Till we have a separate control module driver to write to control module, > > d_can driver will handle the register writes to control module by itself. > > So a new address space to represent this control module register is added > > to d_can driver. > > > > Signed-off-by: AnilKumar Ch <anilkumar@xxxxxx> > > This does not apply to net-next/master: > > Applying: ARM: dts: AM33XX: Add memory resource to d_can node > error: patch failed: arch/arm/boot/dts/am33xx.dtsi:227 > error: arch/arm/boot/dts/am33xx.dtsi: patch does not apply > Patch failed at 0003 ARM: dts: AM33XX: Add memory resource to d_can node > Marc, Sorry about this DT changes are present in linux-omap. Could you please take the driver changes only and ACK on remaining will help. Tony/Benoit, Could you please take dt patches in this series to linux-omap? Thanks AnilKumar -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
