Hi,
During the merge window, a series of patches from various people went in,
allegedly fixing various problems with the OMAP serial driver.
Unfortunately, there was not a full understanding of the issues I brought
up here back in April, and so the "fixes", while being individually
correct, result in a worse situation with the driver than before.
Specifically, this patch:
commit 957ee7270d632245b43f6feb0e70d9a5e9ea6cf6
Author: Vikram Pandita <vikram.pandita@xxxxxx>
Date: Thu Sep 6 15:45:37 2012 +0300
serial: omap: fix software flow control
Software flow control register bits were not defined correctly.
Also clarify the IXON and IXOFF logic to reflect what userspace wants.
does what it says on the tin - it fixes the register definitions so that
we do end up enabling the right two software flow control bits.
The down side is that there are other bugs in this area which have been
exposed. For example:
1. the XON/XOFF registers aren't written to; their address is, but we will
not be writing to the right registers because their access rules are not
respected by the driver. These are by default zero.
This means that with hardware assisted software flow control enabled,
the port will now transmit an 0x00 byte for XON and XOFF events.
2. the driver set_termios function is not called for changes in software
flow control settings if not accompanied by some other change.
3. the there isn't actually a way for the hardware assisted flow control
to be used other than by increasing interrupt latency to cause the
receiver hardware FIFO to fill. This will cause 0x00 bytes to be
transmitted.
There are two options to resolve this. The first one is to revert this
patch to bring the driver back down to the pre-merge window state. The
other is to apply this series of patches, which frankly I don't think
is -rc material, even with the above regressions.
Given that the above regressions were caused by a lack of due care and
correct process (I had declared to TI that I had investigated these
issues back in April), I believe that the right answer is to revert at
least commit 957ee7270d, which should re-hide these other bugs in the
driver.
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
