On Wed, May 09, 2012 at 01:38:34, Tony Lindgren wrote: > * Vaibhav Hiremath <hvaibhav@xxxxxx> [120508 08:32]: > > --- a/arch/arm/mach-omap2/Kconfig > > +++ b/arch/arm/mach-omap2/Kconfig > > @@ -123,8 +123,11 @@ config SOC_OMAPTI81XX > > > > config SOC_OMAPAM33XX > > bool "AM33XX support" > > - depends on ARCH_OMAP3 > > + depends on ARCH_OMAP2PLUS > > This is not needed, it's inside if ARCH_OMAP2PLUS block. > Good point, I will remove it. > > --- a/arch/arm/mach-omap2/Makefile > > +++ b/arch/arm/mach-omap2/Makefile > > @@ -16,6 +16,7 @@ secure-common = omap-smc.o omap-secure.o > > obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) > > obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) > > obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) > > +obj-$(CONFIG_SOC_OMAPAM33XX) += irq.o $(hwmod-common) > > > > ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) > > obj-y += mcbsp.o > > @@ -93,6 +94,7 @@ obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \ > > cm44xx.o prcm_mpu44xx.o \ > > prminst44xx.o vc44xx_data.o \ > > vp44xx_data.o prm44xx.o > > +obj-$(CONFIG_SOC_OMAPAM33XX) += prcm.o > > > > # OMAP voltage domains > > voltagedomain-common := voltage.o vc.o vp.o > > @@ -102,6 +104,7 @@ obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \ > > voltagedomains3xxx_data.o > > obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) \ > > voltagedomains44xx_data.o > > +obj-$(CONFIG_SOC_OMAPAM33XX) += $(voltagedomain-common) > > > > # OMAP powerdomain framework > > powerdomain-common += powerdomain.o powerdomain-common.o > > @@ -116,6 +119,7 @@ obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common) \ > > obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) \ > > powerdomain44xx.o \ > > powerdomains44xx_data.o > > +obj-$(CONFIG_SOC_OMAPAM33XX) += $(powerdomain-common) > > > > # PRCM clockdomain control > > clockdomain-common += clockdomain.o \ > > @@ -132,6 +136,7 @@ obj-$(CONFIG_ARCH_OMAP3) += $(clockdomain-common) \ > > obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common) \ > > clockdomain44xx.o \ > > clockdomains44xx_data.o > > +obj-$(CONFIG_SOC_OMAPAM33XX) += $(clockdomain-common) > > > > # Clock framework > > obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \ > > @@ -149,6 +154,7 @@ obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \ > > clkt_iclk.o > > obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \ > > dpll3xxx.o dpll44xx.o > > +obj-$(CONFIG_SOC_OMAPAM33XX) += $(clock-common) dpll3xxx.o > > > > # OMAP2 clock rate set data (old "OPP" data) > > obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o > > Can you please rebase this on what's now in the cleanup branch at commit > 382ae00105d9989a821f458084e0428bce10b969? That should simplify the Makefile > changes a bit. > Yes, will do it and submit next version today. > Other than that looks good to me. > Thanks, Vaibhav -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
