* Vaibhav Hiremath <hvaibhav@xxxxxx> [120508 08:32]: > --- a/arch/arm/mach-omap2/Kconfig > +++ b/arch/arm/mach-omap2/Kconfig > @@ -123,8 +123,11 @@ config SOC_OMAPTI81XX > > config SOC_OMAPAM33XX > bool "AM33XX support" > - depends on ARCH_OMAP3 > + depends on ARCH_OMAP2PLUS This is not needed, it's inside if ARCH_OMAP2PLUS block. > --- a/arch/arm/mach-omap2/Makefile > +++ b/arch/arm/mach-omap2/Makefile > @@ -16,6 +16,7 @@ secure-common = omap-smc.o omap-secure.o > obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(hwmod-common) > obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(hwmod-common) $(secure-common) > obj-$(CONFIG_ARCH_OMAP4) += prm44xx.o $(hwmod-common) $(secure-common) > +obj-$(CONFIG_SOC_OMAPAM33XX) += irq.o $(hwmod-common) > > ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),) > obj-y += mcbsp.o > @@ -93,6 +94,7 @@ obj-$(CONFIG_ARCH_OMAP4) += prcm.o cm2xxx_3xxx.o cminst44xx.o \ > cm44xx.o prcm_mpu44xx.o \ > prminst44xx.o vc44xx_data.o \ > vp44xx_data.o prm44xx.o > +obj-$(CONFIG_SOC_OMAPAM33XX) += prcm.o > > # OMAP voltage domains > voltagedomain-common := voltage.o vc.o vp.o > @@ -102,6 +104,7 @@ obj-$(CONFIG_ARCH_OMAP3) += $(voltagedomain-common) \ > voltagedomains3xxx_data.o > obj-$(CONFIG_ARCH_OMAP4) += $(voltagedomain-common) \ > voltagedomains44xx_data.o > +obj-$(CONFIG_SOC_OMAPAM33XX) += $(voltagedomain-common) > > # OMAP powerdomain framework > powerdomain-common += powerdomain.o powerdomain-common.o > @@ -116,6 +119,7 @@ obj-$(CONFIG_ARCH_OMAP3) += $(powerdomain-common) \ > obj-$(CONFIG_ARCH_OMAP4) += $(powerdomain-common) \ > powerdomain44xx.o \ > powerdomains44xx_data.o > +obj-$(CONFIG_SOC_OMAPAM33XX) += $(powerdomain-common) > > # PRCM clockdomain control > clockdomain-common += clockdomain.o \ > @@ -132,6 +136,7 @@ obj-$(CONFIG_ARCH_OMAP3) += $(clockdomain-common) \ > obj-$(CONFIG_ARCH_OMAP4) += $(clockdomain-common) \ > clockdomain44xx.o \ > clockdomains44xx_data.o > +obj-$(CONFIG_SOC_OMAPAM33XX) += $(clockdomain-common) > > # Clock framework > obj-$(CONFIG_ARCH_OMAP2) += $(clock-common) clock2xxx.o \ > @@ -149,6 +154,7 @@ obj-$(CONFIG_ARCH_OMAP3) += $(clock-common) clock3xxx.o \ > clkt_iclk.o > obj-$(CONFIG_ARCH_OMAP4) += $(clock-common) clock44xx_data.o \ > dpll3xxx.o dpll44xx.o > +obj-$(CONFIG_SOC_OMAPAM33XX) += $(clock-common) dpll3xxx.o > > # OMAP2 clock rate set data (old "OPP" data) > obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o Can you please rebase this on what's now in the cleanup branch at commit 382ae00105d9989a821f458084e0428bce10b969? That should simplify the Makefile changes a bit. Other than that looks good to me. Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
