[PATCH 11/12] arm: omap3: am35x: Add do_wfi routine for EMIF4 submodules

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>

The typical SDRAM Controller Subsystem module (SDRC)
on TI OMAP3 devices has two submodules: the SDRAM Memory
Scheduler (SMS) submodule, and the SDRC submodule--the
'SDRC' acronym/term is overloaded.  The am35x family of
devices is different in that it has an EMIF4 submodule
instead of an SDRC submodule.  The SMS submodules are
similar, though.

The difference in SDRC/EMIF4 submodules is important because
omap34xx_cpu_suspend() will ultimately access the submodule's
registers and the register sets are different.  To support
the EMIF4 submodule, add the omap3_emif4_do_wfi() routine which
roughly does for the EMIF4 submodule what omap3_do_wfi() does
for the SDRC submodule.  This requires omap34xx_cpu_suspend()
to use a pointer set up in omap_push_sram_idle() so that it
jumps to the correct omap3*_do_wfi() routine in either SDRAM
or SRAM.

Credits: arch/arm/mach-omap2/sleep3517.S in TI's am35x SDK
(05.03.02.00) which appears to be authored by Ranjith Lohithakshan
<ranjithl@xxxxxx> was used as a reference.

CC: Ranjith Lohithakshan <ranjithl@xxxxxx>
Signed-off-by: Mark A. Greer <mgreer@xxxxxxxxxxxxxxx>
---
 arch/arm/mach-omap2/control.c              |    5 +-
 arch/arm/mach-omap2/emif4.h                |   24 ++++++++++
 arch/arm/mach-omap2/pm.h                   |    7 ++-
 arch/arm/mach-omap2/pm34xx.c               |   11 ++++-
 arch/arm/mach-omap2/sleep34xx.S            |   69 ++++++++++++++++++++++++++--
 arch/arm/plat-omap/include/plat/omap34xx.h |    1 +
 6 files changed, 107 insertions(+), 10 deletions(-)
 create mode 100644 arch/arm/mach-omap2/emif4.h

diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 08e674b..c659217 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -283,8 +283,9 @@ void omap3_save_scratchpad_contents(void)
 	if (cpu_is_omap3630())
 		scratchpad_contents.public_restore_ptr =
 			virt_to_phys(omap3_restore_3630);
-	else if (omap_rev() != OMAP3430_REV_ES3_0 &&
-					omap_rev() != OMAP3430_REV_ES3_1)
+	else if (omap3_has_sdrc_emif4() ||
+			(omap_rev() != OMAP3430_REV_ES3_0 &&
+			 omap_rev() != OMAP3430_REV_ES3_1))
 		scratchpad_contents.public_restore_ptr =
 			virt_to_phys(omap3_restore);
 	else
diff --git a/arch/arm/mach-omap2/emif4.h b/arch/arm/mach-omap2/emif4.h
new file mode 100644
index 0000000..0126af3
--- /dev/null
+++ b/arch/arm/mach-omap2/emif4.h
@@ -0,0 +1,24 @@
+/*
+ * SDRC Module, EMIF4 Submodule Definitions
+ *
+ * Author: Mark A. Greer <mgreer@xxxxxxxxxxxxxxx>
+ *
+ * Copyright (c) 2012 by Animal Creek Technologies, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef ____ASM_ARCH_EMIF4_H
+#define ____ASM_ARCH_EMIF4_H
+
+#ifdef __ASSEMBLER__
+
+#define OMAP34XX_EMIF4_REGADDR(reg) \
+		OMAP2_L3_IO_ADDRESS(OMAP343X_EMIF4_BASE + (reg))
+
+#endif
+
+#define EMIF4_PWR_MGMT_CTRL	0x38
+
+#endif
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 36fa90b..ab1262b 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -85,10 +85,13 @@ extern unsigned int omap24xx_cpu_suspend_sz;
 /* 3xxx */
 extern void omap34xx_cpu_suspend(int save_state);
 
-/* omap3_do_wfi function pointer and size, for copy to SRAM */
+/* omap3*_do_wfi function pointers and sizes, for copy to SRAM */
 extern void omap3_do_wfi(void);
 extern unsigned int omap3_do_wfi_sz;
-/* ... and its pointer from SRAM after copy */
+extern void omap3_emif4_do_wfi(void);
+extern unsigned int omap3_emif4_do_wfi_sz;
+/* ... and pointers when in SDRAM and in SRAM after copy */
+extern void (*omap3_do_wfi_sdram)(void);
 extern void (*omap3_do_wfi_sram)(void);
 
 /* save_secure_ram_context function pointer and size, for copy to SRAM */
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 00c4abe..c1dee25 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -66,6 +66,7 @@ struct power_state {
 static LIST_HEAD(pwrst_list);
 
 static int (*_omap_save_secure_sram)(u32 *addr);
+void (*omap3_do_wfi_sdram)(void);
 void (*omap3_do_wfi_sram)(void);
 
 static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
@@ -694,7 +695,15 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *unused)
  */
 void omap_push_sram_idle(void)
 {
-	omap3_do_wfi_sram = omap_sram_push(omap3_do_wfi, omap3_do_wfi_sz);
+	if (omap3_has_sdrc_emif4()) {
+		omap3_do_wfi_sdram = omap3_emif4_do_wfi;
+		omap3_do_wfi_sram = omap_sram_push(omap3_emif4_do_wfi,
+				omap3_emif4_do_wfi_sz);
+	} else {
+		omap3_do_wfi_sdram = omap3_do_wfi;
+		omap3_do_wfi_sram = omap_sram_push(omap3_do_wfi,
+				omap3_do_wfi_sz);
+	}
 
 	if (omap_type() != OMAP2_DEVICE_TYPE_GP)
 		_omap_save_secure_sram = omap_sram_push(save_secure_ram_context,
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 1f62f23..22aac4c 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -33,6 +33,7 @@
 #include "cm2xxx_3xxx.h"
 #include "prm2xxx_3xxx.h"
 #include "sdrc.h"
+#include "emif4.h"
 #include "control.h"
 
 /*
@@ -67,6 +68,8 @@
 #define SDRC_DLLA_STATUS_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
 #define SDRC_DLLA_CTRL_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
+#define PWR_MGMT_CTRL_V		OMAP34XX_EMIF4_REGADDR(EMIF4_PWR_MGMT_CTRL)
+
 /*
  * This file needs be built unconditionally as ARM to interoperate correctly
  * with non-Thumb-2-capable firmware.
@@ -163,8 +166,12 @@ ENTRY(omap34xx_cpu_suspend)
 	 */
 
 	/*
-	 * For OFF mode: save context and jump to WFI in SDRAM (omap3_do_wfi)
-	 * For non-OFF modes: jump to the WFI code in SRAM (omap3_do_wfi_sram)
+	 * For OFF mode: save context and jump to WFI in SDRAM
+	 * (omap3_do_wfi_sdram). For non-OFF modes: jump to the WFI code
+	 * in SRAM (omap3_do_wfi_sram).  Note that omap_push_sram_idle()
+	 * will have set omap3_do_wfi_sdram and omap3_do_wfi_sram to the
+	 * SDRAM and SRAM addresses of either omap3_do_wfi or
+	 * omap3_emif4_do_wfi depending on the type of SDRC submodule.
 	 */
 	ldr	r4, omap3_do_wfi_sram_addr
 	ldr	r5, [r4]
@@ -216,11 +223,15 @@ save_context_wfi:
  THUMB(	nop		)
 	.arm
 
-	b	omap3_do_wfi
+	ldr	r4, omap3_do_wfi_sdram_addr
+	ldr	r5, [r4]
+	bx	r5			@  jump to the WFI code in SRAM
 
 /*
  * Local variables
  */
+omap3_do_wfi_sdram_addr:
+	.word omap3_do_wfi_sdram
 omap3_do_wfi_sram_addr:
 	.word omap3_do_wfi_sram
 kernel_flush:
@@ -232,8 +243,7 @@ kernel_flush:
  */
 
 /*
- * Do WFI instruction
- * Includes the resume path for non-OFF modes
+ * Do WFI instruction (SDRC module has SDRC submodule)
  *
  * This code gets copied to internal SRAM and is accessible
  * from both SDRAM and SRAM:
@@ -391,6 +401,52 @@ wait_dll_lock_counter:
 ENTRY(omap3_do_wfi_sz)
 	.word	. - omap3_do_wfi
 
+/*
+ * Do WFI instruction (SDRC module has EMIF4 submodule)
+ *
+ * This code gets copied to internal SRAM and is accessible
+ * from both SDRAM and SRAM:
+ * - executed from SRAM for non-off modes (omap3_emif4_do_wfi_sram),
+ * - executed from SDRAM for OFF mode (omap3_emif4_do_wfi).
+ */
+	.align	3
+ENTRY(omap3_emif4_do_wfi)
+	/* Put EMIF in self-refresh */
+	ldr     r4, pwr_mgmt_ctrl
+	ldr     r5, [r4]
+	orr     r5, r5, #0x200
+	str     r5, [r4]
+
+	dsb
+	dmb
+
+	wfi
+
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+	nop
+
+	/* Take EMIF out of self-refresh */
+	ldr     r4, pwr_mgmt_ctrl
+	ldr     r5, [r4]
+	bic     r5, r5, #0x200
+	str     r5, [r4]
+
+	ldmfd	sp!, {r4 - r11, pc}	@ restore regs and return
+
+pwr_mgmt_ctrl:
+	.word   PWR_MGMT_CTRL_V
+ENDPROC(omap3_emif4_do_wfi)
+ENTRY(omap3_emif4_do_wfi_sz)
+	.word	. - omap3_emif4_do_wfi
+
 
 /*
  * ==============================
@@ -564,6 +620,9 @@ l2dis_3630:
 /*
  * This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0
  * Copied to and run from SRAM in order to reconfigure the SDRC parameters.
+ *
+ * Note: Never call this routine when running on an am35x device since it
+ *  has an EMIF4 submodule instead of the standard SDRC submodule.
  */
 	.text
 	.align	3
diff --git a/arch/arm/plat-omap/include/plat/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h
index 0d818ac..3a84520 100644
--- a/arch/arm/plat-omap/include/plat/omap34xx.h
+++ b/arch/arm/plat-omap/include/plat/omap34xx.h
@@ -42,6 +42,7 @@
 #define OMAP3430_PRM_BASE	0x48306800
 #define OMAP343X_SMS_BASE	0x6C000000
 #define OMAP343X_SDRC_BASE	0x6D000000
+#define OMAP343X_EMIF4_BASE	0x6D000000
 #define OMAP34XX_GPMC_BASE	0x6E000000
 #define OMAP343X_SCM_BASE	0x48002000
 #define OMAP343X_CTRL_BASE	OMAP343X_SCM_BASE
-- 
1.7.9.4

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux