From: "Mark A. Greer" <mgreer@xxxxxxxxxxxxxxx>
Problem:
--------
When resuming from a Suspend-to-RAM event, the eth0 device
(davinci emac/mdio) on am35xx boards wouldn't work and the
following error message appeared on the console:
"net eth0: could not connect to phy davinci_mdio-0:00"
Cause:
------
When davinci_emac_resume() calls emac_dev_open() which
ultimately calls davinci_mdio_read(), the 'data->suspended'
flag in davinci_mdio.c is still set to 'true'. This causes
davinci_mdio_read() to fail which ripples back up the call
chain causing davinci_emac_resume() to fail. The reason
'data->suspended' is still set to 'true' is that
davinci_mdio_resume() hasn't been called yet as it should
have been. davinci_mdio_resume() must be called before
davinci_emac_resume().
Solution:
---------
Register the "davinci_mdio" platform device before registering
the "davinci_emac" platform device so davinci_mdio_resume()
is called before davinci_emac_resume() and eth0 can resume.
Signed-off-by: Mark A. Greer <mgreer@xxxxxxxxxxxxxxx>
---
arch/arm/mach-omap2/am35xx-emac.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-omap2/am35xx-emac.c b/arch/arm/mach-omap2/am35xx-emac.c
index 1f97e74..d23bd6c 100644
--- a/arch/arm/mach-omap2/am35xx-emac.c
+++ b/arch/arm/mach-omap2/am35xx-emac.c
@@ -97,11 +97,6 @@ void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en)
am35xx_emac_pdata.rmii_en = rmii_en;
am35xx_emac_mdio_pdata.bus_freq = mdio_bus_freq;
- err = platform_device_register(&am35xx_emac_device);
- if (err) {
- pr_err("AM35x: failed registering EMAC device: %d\n", err);
- return;
- }
err = platform_device_register(&am35xx_emac_mdio_device);
if (err) {
@@ -110,6 +105,12 @@ void __init am35xx_emac_init(unsigned long mdio_bus_freq, u8 rmii_en)
return;
}
+ err = platform_device_register(&am35xx_emac_device);
+ if (err) {
+ pr_err("AM35x: failed registering EMAC device: %d\n", err);
+ return;
+ }
+
regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
regval = regval & (~(AM35XX_CPGMACSS_SW_RST));
omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET);
--
1.7.9.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
