Re: [PATCHv2 14/15] OMAP: Panda, Beagle, Overo: DVI: Add i2c_bus_num

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2011/9/12 Tomi Valkeinen <tomi.valkeinen@xxxxxx>:
> On Mon, 2011-09-12 at 11:58 +0200, Enric Balletbò i Serra wrote:
>> 2011/9/12 Tomi Valkeinen <tomi.valkeinen@xxxxxx>:
>> > Add i2c bus number for DVI output. The driver uses this to detect if a
>> > panel is connected and to read EDID.
>> >
>> > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
>> > ---
>> >  arch/arm/mach-omap2/board-omap3beagle.c |    1 +
>> >  arch/arm/mach-omap2/board-omap4panda.c  |    1 +
>> >  arch/arm/mach-omap2/board-overo.c       |    1 +
>> >  3 files changed, 3 insertions(+), 0 deletions(-)
>> >
>> > diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
>> > index 26bc860..742ac45 100644
>> > --- a/arch/arm/mach-omap2/board-omap3beagle.c
>> > +++ b/arch/arm/mach-omap2/board-omap3beagle.c
>> > @@ -206,6 +206,7 @@ static void beagle_disable_dvi(struct omap_dss_device *dssdev)
>> >  static struct panel_dvi_platform_data dvi_panel = {
>> >        .platform_enable = beagle_enable_dvi,
>> >        .platform_disable = beagle_disable_dvi,
>> > +       .i2c_bus_num = 3,
>> >  };
>> >
>> >  static struct omap_dss_device beagle_dvi_device = {
>> > diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
>> > index c35384e..a38ed273 100644
>> > --- a/arch/arm/mach-omap2/board-omap4panda.c
>> > +++ b/arch/arm/mach-omap2/board-omap4panda.c
>> > @@ -458,6 +458,7 @@ static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev)
>> >  static struct panel_dvi_platform_data omap4_dvi_panel = {
>> >        .platform_enable        = omap4_panda_enable_dvi,
>> >        .platform_disable       = omap4_panda_disable_dvi,
>> > +       .i2c_bus_num = 3,
>> >  };
>> >
>> >  struct omap_dss_device omap4_panda_dvi_device = {
>> > diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
>> > index 06064d5..da94376 100644
>> > --- a/arch/arm/mach-omap2/board-overo.c
>> > +++ b/arch/arm/mach-omap2/board-overo.c
>> > @@ -186,6 +186,7 @@ static void overo_panel_disable_dvi(struct omap_dss_device *dssdev)
>> >  static struct panel_dvi_platform_data dvi_panel = {
>> >        .platform_enable        = overo_panel_enable_dvi,
>> >        .platform_disable       = overo_panel_disable_dvi,
>> > +       .i2c_bus_num            = 3,
>> >  };
>> >
>> >  static struct omap_dss_device overo_dvi_device = {
>> > --
>> > 1.7.4.1
>> >
>> > --
>> > To unsubscribe from this list: send the line "unsubscribe linux-omap" in
>> > the body of a message to majordomo@xxxxxxxxxxxxxxx
>> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
>> >
>>
>> Please, can also include the same modification for IGEP v2 board
>> (arch/arm/mach-omap2/board-igep0020.c) ?
>
> Sure. You have tested that the i2c bus is 3 and it works?

Yes, the i2c bus is 3 on IGEP v2 board and I'm just testing and seem is working.

>
>  Tomi
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux