Re: [PATCHv2 14/15] OMAP: Panda, Beagle, Overo: DVI: Add i2c_bus_num

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



2011/9/12 Tomi Valkeinen <tomi.valkeinen@xxxxxx>:
> Add i2c bus number for DVI output. The driver uses this to detect if a
> panel is connected and to read EDID.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> ---
>  arch/arm/mach-omap2/board-omap3beagle.c |    1 +
>  arch/arm/mach-omap2/board-omap4panda.c  |    1 +
>  arch/arm/mach-omap2/board-overo.c       |    1 +
>  3 files changed, 3 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
> index 26bc860..742ac45 100644
> --- a/arch/arm/mach-omap2/board-omap3beagle.c
> +++ b/arch/arm/mach-omap2/board-omap3beagle.c
> @@ -206,6 +206,7 @@ static void beagle_disable_dvi(struct omap_dss_device *dssdev)
>  static struct panel_dvi_platform_data dvi_panel = {
>        .platform_enable = beagle_enable_dvi,
>        .platform_disable = beagle_disable_dvi,
> +       .i2c_bus_num = 3,
>  };
>
>  static struct omap_dss_device beagle_dvi_device = {
> diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
> index c35384e..a38ed273 100644
> --- a/arch/arm/mach-omap2/board-omap4panda.c
> +++ b/arch/arm/mach-omap2/board-omap4panda.c
> @@ -458,6 +458,7 @@ static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev)
>  static struct panel_dvi_platform_data omap4_dvi_panel = {
>        .platform_enable        = omap4_panda_enable_dvi,
>        .platform_disable       = omap4_panda_disable_dvi,
> +       .i2c_bus_num = 3,
>  };
>
>  struct omap_dss_device omap4_panda_dvi_device = {
> diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
> index 06064d5..da94376 100644
> --- a/arch/arm/mach-omap2/board-overo.c
> +++ b/arch/arm/mach-omap2/board-overo.c
> @@ -186,6 +186,7 @@ static void overo_panel_disable_dvi(struct omap_dss_device *dssdev)
>  static struct panel_dvi_platform_data dvi_panel = {
>        .platform_enable        = overo_panel_enable_dvi,
>        .platform_disable       = overo_panel_disable_dvi,
> +       .i2c_bus_num            = 3,
>  };
>
>  static struct omap_dss_device overo_dvi_device = {
> --
> 1.7.4.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

Please, can also include the same modification for IGEP v2 board
(arch/arm/mach-omap2/board-igep0020.c) ?

Best regards,
   Enric
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux