On Mon, 2011-09-12 at 11:58 +0200, Enric Balletbò i Serra wrote:
> 2011/9/12 Tomi Valkeinen <tomi.valkeinen@xxxxxx>:
> > Add i2c bus number for DVI output. The driver uses this to detect if a
> > panel is connected and to read EDID.
> >
> > Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
> > ---
> > arch/arm/mach-omap2/board-omap3beagle.c | 1 +
> > arch/arm/mach-omap2/board-omap4panda.c | 1 +
> > arch/arm/mach-omap2/board-overo.c | 1 +
> > 3 files changed, 3 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
> > index 26bc860..742ac45 100644
> > --- a/arch/arm/mach-omap2/board-omap3beagle.c
> > +++ b/arch/arm/mach-omap2/board-omap3beagle.c
> > @@ -206,6 +206,7 @@ static void beagle_disable_dvi(struct omap_dss_device *dssdev)
> > static struct panel_dvi_platform_data dvi_panel = {
> > .platform_enable = beagle_enable_dvi,
> > .platform_disable = beagle_disable_dvi,
> > + .i2c_bus_num = 3,
> > };
> >
> > static struct omap_dss_device beagle_dvi_device = {
> > diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
> > index c35384e..a38ed273 100644
> > --- a/arch/arm/mach-omap2/board-omap4panda.c
> > +++ b/arch/arm/mach-omap2/board-omap4panda.c
> > @@ -458,6 +458,7 @@ static void omap4_panda_disable_dvi(struct omap_dss_device *dssdev)
> > static struct panel_dvi_platform_data omap4_dvi_panel = {
> > .platform_enable = omap4_panda_enable_dvi,
> > .platform_disable = omap4_panda_disable_dvi,
> > + .i2c_bus_num = 3,
> > };
> >
> > struct omap_dss_device omap4_panda_dvi_device = {
> > diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
> > index 06064d5..da94376 100644
> > --- a/arch/arm/mach-omap2/board-overo.c
> > +++ b/arch/arm/mach-omap2/board-overo.c
> > @@ -186,6 +186,7 @@ static void overo_panel_disable_dvi(struct omap_dss_device *dssdev)
> > static struct panel_dvi_platform_data dvi_panel = {
> > .platform_enable = overo_panel_enable_dvi,
> > .platform_disable = overo_panel_disable_dvi,
> > + .i2c_bus_num = 3,
> > };
> >
> > static struct omap_dss_device overo_dvi_device = {
> > --
> > 1.7.4.1
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
>
> Please, can also include the same modification for IGEP v2 board
> (arch/arm/mach-omap2/board-igep0020.c) ?
Sure. You have tested that the i2c bus is 3 and it works?
Tomi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
