On Friday 09 September 2011 01:34 PM, Shawn Guo wrote:
Hi Santosh,
On Sun, Sep 04, 2011 at 07:24:15PM +0530, Santosh Shilimkar wrote:
This patch adds the CPU0 and CPU1 off mode support. CPUX close switch
retention (CSWR) is not supported by hardware design.
The CPUx OFF mode isn't supported on OMAP4430 ES1.0
CPUx sleep code is common for hotplug, suspend and CPUilde.
Signed-off-by: Santosh Shilimkar<santosh.shilimkar@xxxxxx>
Cc: Kevin Hilman<khilman@xxxxxx>
---
arch/arm/mach-omap2/Makefile | 3 +-
arch/arm/mach-omap2/include/mach/omap-secure.h | 8 +
arch/arm/mach-omap2/include/mach/omap4-common.h | 25 +++
arch/arm/mach-omap2/omap-mpuss-lowpower.c | 249 +++++++++++++++++++++++
arch/arm/mach-omap2/omap-smp.c | 6 +
arch/arm/mach-omap2/omap4-sar-layout.h | 9 +
arch/arm/mach-omap2/pm44xx.c | 6 +
arch/arm/mach-omap2/sleep44xx.S | 213 +++++++++++++++++++
8 files changed, 518 insertions(+), 1 deletions(-)
create mode 100644 arch/arm/mach-omap2/omap-mpuss-lowpower.c
[...]
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index 049f426..230ab8c 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -11,8 +11,221 @@
#include<linux/linkage.h>
#include<asm/system.h>
+#include<asm/smp_scu.h>
+#include<asm/memory.h>
+#include<asm/hardware/cache-l2x0.h>
+#include<plat/omap44xx.h>
#include<mach/omap4-common.h>
+#include<mach/omap-secure.h>
+
+#include "omap4-sar-layout.h"
+
+#ifdef CONFIG_SMP
+
+.macro DO_SMC
+ dsb
+ smc #0
+ dsb
+.endm
+
+ppa_zero_params:
+ .word 0x0
+
+/*
+ * =============================
+ * == CPU suspend finisher ==
+ * =============================
+ *
+ * void omap4_finish_suspend(unsigned long cpu_state)
+ *
+ * This function code saves the CPU context and performs the CPU
+ * power down sequence. Calling WFI effectively changes the CPU
+ * power domains states to the desired target power state.
+ *
+ * @cpu_state : contains context save state (r0)
+ * 0 - No context lost
+ * 1 - CPUx L1 and logic lost: MPUSS CSWR
+ * 2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR
+ * 3 - CPUx L1 and logic lost + GIC + L2 lost: MPUSS OFF
I was told by rmk that same as imx6q, omap44xx will retain L2 content
across suspen/resume cycle. Then what does "L2 lost" mean here? Or
what rmk meant is the case cpu_state == 2?
Yes.
The last case is entire SOC OFF. We call Device OFF in OMAP.
All voltages will scale to 0 V. This isn't supported by this
series.
Regards
Santosh
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
