Hi Santosh, On Sun, Sep 04, 2011 at 07:24:15PM +0530, Santosh Shilimkar wrote: > This patch adds the CPU0 and CPU1 off mode support. CPUX close switch > retention (CSWR) is not supported by hardware design. > > The CPUx OFF mode isn't supported on OMAP4430 ES1.0 > > CPUx sleep code is common for hotplug, suspend and CPUilde. > > Signed-off-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx> > Cc: Kevin Hilman <khilman@xxxxxx> > --- > arch/arm/mach-omap2/Makefile | 3 +- > arch/arm/mach-omap2/include/mach/omap-secure.h | 8 + > arch/arm/mach-omap2/include/mach/omap4-common.h | 25 +++ > arch/arm/mach-omap2/omap-mpuss-lowpower.c | 249 +++++++++++++++++++++++ > arch/arm/mach-omap2/omap-smp.c | 6 + > arch/arm/mach-omap2/omap4-sar-layout.h | 9 + > arch/arm/mach-omap2/pm44xx.c | 6 + > arch/arm/mach-omap2/sleep44xx.S | 213 +++++++++++++++++++ > 8 files changed, 518 insertions(+), 1 deletions(-) > create mode 100644 arch/arm/mach-omap2/omap-mpuss-lowpower.c > [...] > diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S > index 049f426..230ab8c 100644 > --- a/arch/arm/mach-omap2/sleep44xx.S > +++ b/arch/arm/mach-omap2/sleep44xx.S > @@ -11,8 +11,221 @@ > > #include <linux/linkage.h> > #include <asm/system.h> > +#include <asm/smp_scu.h> > +#include <asm/memory.h> > +#include <asm/hardware/cache-l2x0.h> > > +#include <plat/omap44xx.h> > #include <mach/omap4-common.h> > +#include <mach/omap-secure.h> > + > +#include "omap4-sar-layout.h" > + > +#ifdef CONFIG_SMP > + > +.macro DO_SMC > + dsb > + smc #0 > + dsb > +.endm > + > +ppa_zero_params: > + .word 0x0 > + > +/* > + * ============================= > + * == CPU suspend finisher == > + * ============================= > + * > + * void omap4_finish_suspend(unsigned long cpu_state) > + * > + * This function code saves the CPU context and performs the CPU > + * power down sequence. Calling WFI effectively changes the CPU > + * power domains states to the desired target power state. > + * > + * @cpu_state : contains context save state (r0) > + * 0 - No context lost > + * 1 - CPUx L1 and logic lost: MPUSS CSWR > + * 2 - CPUx L1 and logic lost + GIC lost: MPUSS OSWR > + * 3 - CPUx L1 and logic lost + GIC + L2 lost: MPUSS OFF I was told by rmk that same as imx6q, omap44xx will retain L2 content across suspen/resume cycle. Then what does "L2 lost" mean here? Or what rmk meant is the case cpu_state == 2? -- Regards, Shawn -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
